A+K porous balance flowmeter

A+K porous balance flowmeter

The A+K integrated balance flowmeter is based on the A+K porous balance rectification technology, combined with flow measurement technology, detection technology, and communication technology. It integrates primary components, impulse devices, transmission units, and calculation units to output electrical signals representing differential pressure or flow rate. The A+K integrated balanced flowmeter adopts an overall design that optimizes measurement performance, with the characteristics of compact structure, high system accuracy, wide measurement range, short straight pipe section requirements, and convenient on-site installation, avoiding many difficulties in design, procurement, installation, and commissioning.

A+K porous balance flowmeter Product performance:

Simplify complexity into a truly integrated product

Reduce on-site workload, minimize leakage points, and save overall investment

Adopting * * quality transmitter with excellent performance

Durable and sturdy, improving production efficiency

Standardized design ensures measurement accuracy and consistency

2D before and after the straight pipe section

Reduce signal distortion and improve measurement accuracy

Improve process control accuracy and increase yield

*Low long-term pressure loss, saving operating costs

Complete configuration and testing within the factory*

Product Parameters:

Measurement medium: suitable for measuring liquids, gases, and vapors, standard structure is not suitable for strong corrosive, high viscosity, easy to crystallize, and dirty media

Medium temperature: gas, liquid: -40-250 ℃; Steam: below 550 ℃, condensation device added

Instrument size: DN15-DN600

Uncertainty: System reference accuracy ± 1.0%

Range ratio: 7:1-10:1

*Long term pressure loss: 10-30% DP

Straight pipe section: Front 2D+Rear 2D

Power supply: Two wire 24V DC circuit power supply

Output signal: 4-20 mA+HART

Communication: HART protocol, subject to specific configuration

Explosion proof level: higher than Ex ia IIC T4 and Ex d IIC T6 explosion-proof levels, subject to actual configuration

Display: LCD screen, displaying differential pressure or percentage

Instrument material: determined according to actual design requirements

Process connection: The standard is flange connection, with optional clamping and welding structures

Connection standard: Complies with ANSI/HG20615 CL150-CL600 lb, DIN/HG20592 PN10-PN100 bar

Installation location: default is horizontal installation, vertical installation requires customization

Special application: Oxygen adopts oil free degreasing process, and the transmission unit is filled with inert liquid