Acid alkali resistant magnetic flap level gauge

NegotiableUpdate on 01/09

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The acid and alkali resistant magnetic flap level gauge uses a magnetic float as the measuring element and a magnetic steel driven flip column display, without the need for energy

Product Details

Acid alkali resistant magnetic flap level gaugeIt uses a magnetic float as the measuring element and a magnetic steel driven flip column display, without the need for energy. Suitable for various environments ranging from low temperature to high temperature, vacuum to high pressure, etc. It is an ideal liquid level measurement product for industries such as petroleum and chemical. The magnetic replica level gauge is equipped with upper and lower limit switch outputs, which can achieve remote alarm and limit control. The magnetic replica level gauge is equipped with a transmitter, which can achieve remote indication, detection, and control of liquid level. According to the different installation positions of the container, two forms are provided: side mounted and top mounted. Provide stainless steel andABSTwo materials of engineering plastics; of whichABSEspecially suitable for corrosive media such as acids and alkalis.

Acid alkali resistant magnetic flap level gaugeStructural features:

lBasic type
According to the principle of buoyancy, the float in the measuring tube moves up and down with the rise and fall of the liquid level. The permanent magnetic steel inside the float drives the red and white flip columns to flip through magnetic coupling 180 When the liquid level rises, the flip column changes from white to red, and when it falls, it changes from red to white, thereby indicating the liquid level.
lUpper and lower limit switch output
By using a magnetic float to move with the liquid level, the reed switch installed at the set position of the liquid level gauge riser is activated to achieveON-OFFControl or alarm.
lElectric remote transmission
Install a transmitter on the magnetic replica level gauge. The transmitter consists of two parts: a sensor and a converter. It moves up and down through a magnetic float and uses magnetic coupling to sequentially move the measuring components inside the conduit, obtaining changes in resistance signals and converting them into0~10mAperhaps4~20mAThe standard current signal output is used to connect with digital display instruments or computers for remote display.

Acid alkali resistant magnetic flippingboardMain technical parameters of liquid level gauge:

Installation form and content		Side mounted	Top mounted
Installation spacing (Measurement range)		500,800,1100,1400,1700,2000,2500, 3000,3500,4000,4500,5000,5500,6000	500,800,1100,1400,1700,2000,2500,3000
Working pressure		0.6,1.6,2.5,4.0MPa	0.6,1.6,2.5MPa
Medium density		≥0.5g/cm 3	≥0.76g/cm 3
Connecting flange	stainless steel	flange20-40（D N 20 P N 4.0）（GB9119-88）	flange200-25（D N 200 P N 2.5）（GB9119-88）
	ABS	flange20-10（D N 20 P N 1.0）（GB9119-88）	flange200-6（D N 200 P N 0.6）（GB9119-88）
Main material		ABS(Work pressure)0.6MPa）1Cr18Ni9T
medium temperature		-40 ℃~100℃ （ABS: -40℃~80℃ ）
ambient temperature		-40 ℃~+70℃
Indication error		±10mm
Viscosity		≤1st（10 - 4 m/s）
Upper and lower limit switch output		1. Control sensitivity: 10mm 2.Output contact capacity: AC220V2A 3.Contact life: 5×10 4
Continuous electric remote transmission display		4~20mA 1. accuracy:±1.5% 2. Output Load: 750 3. output signal: 0~10mAoutput, 220VACpower supply 4~20mAoutput, 24VDCtwo-wire system 4. Explosion proof featuresiaⅡCT4Intrinsically Safe

Acid alkali resistant magnetic flippingboardThe composition of the liquid level gauge is as follows:

	Magnetic replica liquid level gauge
		code	Installation method
		1	Side mounted
		2	Top mounted
			code	Material
			1	ABS
			2	1Cr18Ni9Ti
				code	nominal pressure
				1	0.6MPa (only applicable when the main material is ABS)
				2	1.6MPa
				3	2.5MPa
				4	2.5MPa
					code	type
					1	Basic type
					2	Equipped with upper and lower limit switch outputs
					3	Live remote transmission (0~10mA output, 220V, AC)
					4	Live remote transmission (4-20mA output, 24V, DC)
					5	Equipped with intrinsic safety explosion-proof remote transmission (4-20mA output, 24V, DC)
							Installation spacing (measurement range)
							L1	Installation depth (top mounted) (0~4000mm optional)
								Medium density	g/cm3
AKLT- 1 1 1 1 L= □ L= □ p= □