Adjustable gantry frame

NegotiableUpdate on 02/19

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Explanation: The modular design of the gantry frame meets the needs of various structural loading test applications and load configurations, whether it is simple single channel building structural static testing or complex multi pass rail vehicle bogie durability performance testing, achieving high stiffness loading applications

Product Details

1. Product introduction: Main functions and advantages of the equipment:

1.1 Product Overview

To meet the needs of various structural loading test applications and load configurations, whether it is simple single channel building structural static testing or complex multi pass rail vehicle bogie durability performance testing, the modular design of the gantry enables high stiffness loading applications and seamless integration with various testing actuators, providing high-performance and highly flexible testing solutions for structural laboratories to adapt to constantly evolving testing needs.

1.2 Product Advantages and Technical Features

1.2.1 Performance

The closed box girder structure improves the bending stiffness and enables higher frequency loading testing.

1.2.2. Broad

The height of the crossbeam can be easily adjusted, and it supports compatibility with multiple types of actuator cylinders that can be installed vertically or horizontally.

1.2.3. Simple

The quick positioning installation kit enables adjustment of the frame height and the position of the actuator cylinder.

1.2.4 Durable

Through pre loaded structural design, the anti fatigue characteristics of the system are enhanced.

Acceptance criteria and third-party verification

1. Acceptance criteria: The technical indicators shall be in accordance with the methods specified in the "Technical Agreement" B/T5170-1995 standard signed by both parties.

2. Acceptance method: Formal acceptance shall be conducted on the site of the purchaser.

3. If the purchaser needs to invite a third party (verified by the National Environmental Testing Equipment Quality Inspection Center and issued a valid inspection report) to participate in the acceptance before leaving the factory, the cost shall be borne by the purchaser. If the first acceptance is not qualified, the cost incurred during the second acceptance after improvement by the supplier shall be borne by the supplier.

4. The customer entrusts the National Environmental Testing Equipment Quality Inspection Center to conduct calibration on their own.