Alloy wear resistance erosion corrosion strength testing machine

Product Introduction

The alloy wear resistance erosion corrosion strength testing machine uses sliding conflict to conduct wear tests on alloy materials under specified pressure wear conditions, using a rotating metal wheel to drive abrasive materials such as mineral sand, sand and gravel mixed with water to measure the wear resistance strength of relevant alloys. Measure the wear resistance of relevant hard alloys under specified high-pressure wear conditions. This experimental machine can meet the requirements of ASTM standard B611-85 method. The function is equivalent to Falex dry sand/rubber wheel conflict testing machine, which is satisfactory ASTM G65，ASTM B611，ASTM G105 SAE Recommended Practice（Falex Dry Sand/Rubber Wheel Apparatus） Waiting for standards.

working conditions

a) Within the temperature range of 10 ℃ to 35 ℃ at room temperature;

b) In an environment with a relative humidity not exceeding 30%;

c) In an environment without sensation, corrosive media, and strong electromagnetic interference;

d) The fluctuation range of the power supply voltage shall not exceed ± 10% of the additional voltage, and the fluctuation of the frequency shall not exceed ± 2% of the additional frequency;

e) Install correctly on a stable foundation, with a levelness of 0.5/1000.

Technical Parameter