Altitude climate simulation test chamber

Altitude climate simulation test chamberPriceAltitude climate simulation test chamberManufacturerbrand

1、 Purpose:

vacuumLow pressure (high-altitude) simulation test,All tested samples were tested under negative pressure of 11.6kPa (1.68psi).

IIAccording to the standard:

UN 38.3TheUL 1642、IEC61960Testing standards;

threeMain technical parameters:

Specification ModelHE-DY-300/400/500/600/800/1000

Inner box dimensions (width * height * depth): 300 * 300 * 300, 400 * 400 * 400, 500 * 500 * 500, 600 * 600 * 600, 800 * 800 * 800, 1000 * 1000 * 1000 (mm)

Dimensions (width * height * depth): 600 * 470 * 710, 700 * 570 * 810, 800 * 670 * 910, 900 * 870 * 1010, 110 * 1070 * 1210, 1300 * 1270 * 1410

Temperature range: normal temperature

Visual Window:Tempered glass with explosion-proof film

Timer: Three digit display 999 (switchable between H hours, M minutes, S seconds)

真空度:≤133pa

Vacuum degree range:-100Kpa～0 Kpaadjustable

Pressure range:11.6KPa(Vacuum gauge reading<)-0.0884Mpa）

Pressure fluctuation: ≤5%

4、 Conclusion Structure:

4.1.The box is made of high-quality cold-rolled steel plate, coated with electrostatic powder coating on the surface, which is hard and firm, and has * anti rust ability.

4.2.The studio is made of high-quality stainless steel plates, with rounded corners, smooth, fluent, and easy to clean.

4.3.Fill the space between the box and the studio with ultra-fine glass wool insulation material.

4.4.The box door is a double-layer tempered glass structure, which allows clear observation of the items inside the box.

4.5.A rubber sealing ring is installed between the studio and the glass door to ensure a high degree of vacuum inside the box.

4.6.The vacuum gauge is a digital display, which can be manually started, stopped, and decompressed.

4.7.4-liter vacuum pump with a power of 550W.