Anti corrosion integrated temperature transmitter

WZPB--441S-FAnti corrosion integrated temperature transmitter304 village PTFE DN25 insertion depth 150 on-site indication+remote transmission, with explosion-proof rating: CT4IP66 {to be used for dual purposes [one 4-20mA output, one PT100 output two-wire or three wire system] protection tube diameter φ 10 range: 0-150 degrees

The WZPB-441S-F integrated temperature transmitter is widely used in industries such as petroleum, chemical, metallurgical, power, shipbuilding, light industry, and environmental protection. It can be used in conjunction with dynamic coil instruments, digital display instruments, recording instruments, regulators, PLC, DCS systems to form various temperature measurement and control systems.

The so-called integrated temperature transmitter refers to a temperature transmitter that installs the transmitter module in the junction box or junction box of the temperature measuring element. The transmitter module and temperature measuring element form a whole and can be directly installed on the industrial equipment being measured, outputting a unified standard signal. This type of transmitter has the advantages of small size, light weight, easy on-site installation, strong automatic detection ability for output signals, and convenient long-distance transmission. For transmitters with temperature measuring elements using thermocouples, it also has the advantage of saving installation costs without the need for expensive compensation wires. Therefore, integrated temperature transmitters are widely used in industrial production. Due to the direct installation of the integrated temperature transmitter on site, the transmitter module is generally encapsulated with fully cured epoxy resin to improve its adaptability to harsh operating environments. However, due to the fact that the integrated circuit inside the transmitter module generally operates within the temperature range of -20 to+80 degrees Celsius, exceeding this range will cause changes in the performance of electronic components, and the inverter will not function properly. Therefore, special attention should be paid to the ambient temperature of the transmitter module during use.

List of product models for on-site display explosion-proof thermal resistance WZPB-241S integrated temperature transmitter

Product Modelgraduation markTemperature range ℃Thermal response timeExplosion-proof ratingSpecification (mm)

dL

WRMB-240

WRMB-240GN0-800<90SdIIBT4

dIIBT5

dIIBT6

iaIICT6Ø16

300*150

350*200

400*250

450*300

500*350

550*400

650*500

900*750

1150*1000

1650*1500

2150*2000

<24S

WRNB-240

WRNB-240G

K0-800<90S

<24S

WREB-240

WREB-240GE0-600<90S

<24S

WRCB-240

WRCB-240GT0-350<90S

<24S

WRFB-240

WRFB-240GJ0-500<90S

<24S

WZPB-241

WZPB-241GPt100-200-500<120SØ12

<24S

WZCB-241GA

WZCB-241GC

Cu50

Cu100

-50-100<120S

<24S

1) Thermocouple Class I thermistor is ordered according to the agreement;

2) The remaining material of the protective tube is 1Cr18Ni9Ti, and the rest will be ordered according to the agreement;

3) Working pressure ≤ 10MPa

WZPB--441S-FAnti corrosion integrated temperature transmitterRelated resources