BA-10-12A Ceramic Fiber Muffle Furnace 16L, 1200 ℃, Imported Furnace and Heating Wire

BA-10-12A Ceramic Fiber Muffle Furnace Detailed Introduction
The BA-10-12A ceramic fiber muffle furnace body is made of American ceramic fiber material, which has good insulation performance (the surface temperature of the furnace body is only 60 ℃ when it reaches 1000 ℃, while the national standard is 100 ℃) and is lightweight. The BA-10-12A ceramic fiber muffle furnace heating wire is made of alloy material from the Swedish company Contal. The BA-10-12A ceramic fiber muffle furnace has a uniform heating temperature and a fast heating rate. It only takes 20 minutes to reach 1000 ℃ (which is very suitable for the chemical industry), while the traditional muffle furnace takes about 80 minutes. It has good energy-saving performance. The BA-10-12A ceramic fiber muffle furnace consumes about 40% of the energy consumption of a regular muffle furnace, and does not shed dust or slag, which will not affect the effectiveness of the experiment.
1. The BA-10-12A ceramic fiber muffle furnace adopts high-purity ceramic fiber materials from the United States, with a total insulation and refractory layer of 50mm
2. The BA-10-12A ceramic fiber muffle furnace uses Swedish Contal electric heating elements, with the same resistance but completely different uniformity.
3. Quality of international products and domestic prices
4. Advanced temperature control system
5. It is equipped with functions to prevent power outages and electrical misoperations after shutdown due to faults, as well as protection against overheating and power outages on the surface of the furnace, and multiple safety measures to prevent accidents from occurring.

The BA-10-12A ceramic fiber muffle furnace can be used in routine laboratories of universities and research institutes for routine teaching and experimental research in various disciplines such as physics, chemical materials, biology, electronics, etc. For example:
(1) Hot processing, cement, and building materials industries: carry out hot processing or treatment of small workpieces, such as heating small precision ceramics, new material development, etc;
(2) Pharmaceutical industry: used for drug inspection, pre-treatment of medical samples, etc.
(3) Analytical chemistry industry: as a sample processing tool in fields such as water quality analysis and environmental analysis. It can also be used for petroleum and its analysis.
(4) Coal quality analysis: used for determining moisture, ash content, ash melting point analysis, ash composition analysis, and elemental analysis. It can also be used as a universal ashing furnace.

Technical parameters of BA-10-12A ceramic fiber muffle furnace
1. Studio size/depth, width, and height: 400x250x160mm
2. Design temperature: 1200 ℃
3. Temperature control accuracy: ± 1 ℃
4. Temperature uniformity: 0.5 ℃
5. Temperature control form: PID intelligent temperature controller
6. Heating rate: ≥ 60 ℃
7. Sensor: Nickel chromium nickel silicon division number: K
8. Power supply voltage: AC-220V
9. Power: 10KW
10. Heating element: Swedish Contal electric heating element