BA-YWP120 Salt Spray Test Chamber

BA-YWP120 Salt Spray Test Chamber Detailed Introduction:

The BA-YWP120 salt spray test chamber is a device that simulates the salt spray dispersion environment composed of tiny salt droplets in the atmosphere. It is widely used in electronic, electrical, automotive, aviation, mobile communication, motorcycle, plastic, mechanical and other components, electronic components, metal material surfaces, for conducting overall or protective layer salt spray corrosion tests.

structural characteristics

This equipment consists of a chamber, chamber heating, humidification system, saturation system, electrical control system, air supply system, protection system, etc

Laboratory: Made of German PVC gray heat-resistant and impact resistant board with a thickness of 6mm.

Thermostatic water bath: Made of German PVC gray heat-resistant and impact resistant board, with a thickness of 6mm, and equipped with an automatic water level controller, eliminating the inconvenience of manual water addition.

Laboratory cover: Made of transparent European heat-resistant acrylic board with a thickness of 5mm.

Reagent replenishment bucket: concealed with water level gauge, made of German PVC gray impact resistant board with a thickness of 5mm, integrated with the appearance of the machine.

Laboratory basket frame: made of PVC gray heat-resistant angle material, can freely adjust the test angle by 15 degrees^oAnd 30^oCorner.
If the test piece is placed at a 15 degree angle, 20 pieces can be placed
If the test piece is placed at a 30 degree angle, 15 pieces can be placed
Note: The size of the test piece is 150 × 70mm (H × D)

Saturated air tank: made of stainless steel plate, with a thickness of 2mm, and equipped with an automatic water level controller, eliminating the inconvenience of manual water addition. The outer side of the box is equipped with a graduated liquid separation tube, which can measure the size of salt spray settlement at a glance. There is a water seal groove between the equipment box cover and the box, which has good air tightness and a water discharge device. The bottom of the working room is equipped with a water stop ring, and the middle is an overflow port, which can maintain a certain water level, prevent the aging of the box, and discharge excess water outside the box

Technical parameters of BA-YWP120 salt spray test chamber:

Model BA-YWP120
Studio size 120 × 85 × 50cm
Outer box size 200 × 115 × 145cm
Laboratory volume 600L
Salt water tank capacity 40L
Material thickness 10mm
Power supply AC 220V 25A
Laboratory temperature: RT~+55 ℃
Temperature fluctuation: ≤± 0.5 ℃
Salt spray settling amount: 1-2ml/h. 80cm²

Spray mode
Cone type disperser: it can adjust the size of spray and make the fog fall evenly.
Nozzle: Precision glass nozzle made of PYREX (imported from Taiwan with original packaging), continuous and intermittent spray optional

Mist removal method
The cover of the box is designed in a conical shape with a top angle of 120 ℃ by compressing the mist with air, which is beneficial for preventing the droplets generated by salt spray from directly dripping onto the sample and ensuring the accuracy of the sample.

control system
Laboratory temperature control: 0~99.9 ℃, accuracy: 0.1 ℃ (dual digital display), one VT4810 PID automatic calculation machine.
Heating tank liquid expansion safety temperature controller 0~110 ℃ 2 pieces (Western European products)
One VT4810 PID automatic calculation machine with an air bucket temperature controller ranging from 0 to 99.9 ℃ and an accuracy of 01 ℃ (even number display). Time controller: ANV AH5R-2 1 unit
Accumulator: 0~9999.9 hr Taiwan made RISESEN1 only

First level pressure adjustment structure:
One pressure regulating valve: equipped with one set of pressure gauges (first regulate the pressure to 2-2.5Kg/cm)²）
2. Secondary pressure regulating valve: Taiwan made pressure regulating valve 1/4 "PT, pressure 0~4.0 Kg/cm²Adjustable (the spray pressure is adjusted at 1.0 Kg/cm²）
3. Pressure gauge: 2 Kg/cm² 1 piece, with an accuracy of 0.1 Kg/cm².
The French imported illuminated buckle switch can be fastened continuously for more than 10000 times.
Two STON LY2N protective relay stations made in Taiwan
Taiwan made STON MY2N holds 4 electric post stations
Four YCT V2A702-03 solenoid valves

safety protection
1 set of water level controller for water shortage protection, 3 status warning lights, 2 sets of over temperature protection switches

Other configurations
One set of storage rods (able to withstand test samples weighing up to 2Kg), 500g NaCl reagent, packaged in two bottles of 10 kg/L saline solution preparation barrels, one imported 80cm2 standard collection cup, one 50mL measuring cylinder.

test environment
Temperature: In order to stably utilize the functions and performance of the laboratory, a place with a perennial temperature of 5 ℃~35 ℃ should be selected
Relative humidity: not exceeding 85% RH
Atmospheric pressure: 86-106kPa
There is no strong vibration around
No direct sunlight or direct radiation from other heat sources
There is no strong airflow around, and when the surrounding air needs to flow strongly, the airflow should not be directly blown onto the box
No strong electromagnetic field influence around
There is no high concentration of dust or corrosive substances around

meet the standard
Complies with GB2423.17 Basic Test Procedures for Electrical and Electronic Products - Test Ka: Salt Spray Test Method
Complies with the testing requirements of GB10587-89
Meets the testing requirements of the national military standard GJB-150
Provide relevant materials such as product certification, warranty card, user manual, electrical schematic diagram, and instrument manual
Free transportation, home delivery, free installation, debugging and training, implementation of three guarantees, one-year warranty, lifelong maintenance