Brass pipe flame arrester

Model of brass pipeline flame arrester：HQF-X

Product Introduction: BrasspipeFlame arresterIt is composed of many small, uniform, or non-uniform channels that can pass through gasThe solid material composed of pores or voids requires these channels or pores to be as small as possible,Small to

As long as it can pass through flames. In this way, the flame enters the obstructionAfter the firearm was fired, it split into many small flame streams that were extinguished. The mechanism by which flames can be extinguished is through heat transfer and wall effect.

brassFlame arrestersTechnical Parameter：

Caliber:DN15-50

Connection: Internal thread

Pressure:PN1.0MPa-1.6MPa

Main material: brass

Flame retardant core material: stainless steel

Standard for brass flame arrestersDesign, Manufacturing, and Testing StandardsHGJ532-91 GB150-98

Working temperature:-40℃~ +300℃

brassFlame arrestersMaintenance and upkeep：

1)In order to better achieve the performance of the flame arrester for use, before installing the flame arrester, it is necessary to carefully read the instructions provided by the manufacturer and carefully check that the label is consistent with the requirements of the installed pipeline.

2)The flow direction mark on the flame arrester needs to be consistent with the flow direction of the medium.

3)、Flame arresterIt should be checked every three to four months. Check whether the fire-resistant layer has defects such as blockage, deformation, or corrosion.

4)When cleaning the flame arrester core components, high-pressure steam, non corrosive solvents, or compressed air should be used for blowing, and sharp hardware brushes should not be used.

5)When reinstalling the fire-resistant layer, the gasket should be updated and the sealing surface should be confirmed to be clean and undamaged, without any air leakage.

6)If the flame arrester is damaged, it should be repaired or replaced immediately.

Shanghai Nanshi is a professionalManufacturer of brass pipe flame arrestersThe products produced by the company include breathing valves, flame arresters, fire-resistant breathable caps, fire-resistant vacuum pressure caps, aluminum alloy ball valves, and aluminum alloy

onelawLanqiu valve, oil discharge port, double door bottom valve, oil measuring hole and other supporting accessories.

Ordering Notice: (National Standard)

1A:Product name, model, nominal diameterB:Media and temperaturePressure RangeC:Do you have any attachments, delivery dates, special requirements, etc. so that we can make the correct selection for you.

2、 If the design unit has already selected our company's flame arrester model, please order directly from our sales center based on the flame arrester parameters.

3、 When the situation you are using is very important or the environment is complex,Please provide design drawings and detailed parameters,Our engineering experts will focus on reviewing and analyzing for you.

4、 The above prices are all fictitious. Interested parties please contact us. We can provide you with professional solutions,Including design, customization, complete set, operation, and service. We have always been committed to preventing

A leader in the firearms industry,We will provide you with the latest knowledge, services, and technical consultants on flame arresters. If you have any questions, you can call us,We will do our best to provide you with

High quality service. By closely monitoring customer needs and application experience, grasping market orientation: through high-intensity R&D investment,Enhance organizational capabilities through scientific management and cultural shaping; pass through

highValue and continuously improve, making quality and service our brand logo.

Welcome to visit our website【http://www.shhxfcj.com】,If you have any questions.You can call us,WeWe will do our best to provide you with high-quality service.

Telephone:.