Ripple tank flame arrester

Model of flame arrester for corrugated storage tank：ZGB-C

1Product Overview:rippleTank flame arresterUsed for installing important safety equipment on fixed top storage tanks for crude oil, gasoline, kerosene, diesel, aromatics, sulfur, and other fuels.Its function is to allowcombustible

Explosive gases pass through and have a choking effect on flames.Suitable special flame retardant gases include oxygen, hydrogen, natural gas, biogas, etc.

two、rippleTank flame arrestermain features：1. This new type of flame arrester has been tested and verified by the Fire Science Research Institute of the Ministry of Public Security, and meets national standardsGB5908-86The requirements.2. Product Structure

Reasonable and aesthetically pleasing, the shell can be made of cast aluminum, carbon steel, or stainless steelMade of steel or other materials, lightweight, easy to install, with fire-resistant layer core made ofStainless steel material, strong corrosion resistance, fire resistance, explosion resistance, etc

The technical performance is outstanding and superior.3. This flame arrester is usually used in conjunction with a breathing valve or separately, and can also be applied to the ventilation pipeline of an internal floating roof oil tank.

IIIrippleTank flame arresterSize and Structure Diagram：

4rippleTank flame arresterpurpose：

1.On pipelines transporting flammable gases.

2.Torch system.

3.Oil and gas recovery system.

4.The pipe network for heating furnace fuel gas.

5.Gas purification and chemical system.

6.Gas analysis system.

7.Coal mine gas emission system.

5rippleTank flame retardantimplementInstallation and maintenance:

The explosion-proof corrugated flame arrester of the pipeline can be installed horizontally or vertically when connected to the pipeline. Regular inspection, once blockage is found, high-pressure steam should be used、Compressed air or organic solvent cleaning,

If the core is found to be mechanically damaged or corroded by the medium, it should be replaced immediately.

1. In order to ensure the performance of the flame arrester meets its intended use, it is necessary to carefully read the instruction manual before installing the flame arrester and carefully check the label against the installed oneWhether the pipeline requirements are consistent.

2 The flow direction mark on the flame arrester must be consistent with the flow direction of the medium.

3 It should be checked every six months. Check whether the fire-resistant layer has defects such as blockage, deformation, or corrosion.

4 The blocked fire-resistant layer should be cleaned thoroughly to ensure that each hole is unobstructed, and any deformed or corroded fire-resistant layer should be replaced.

5 When cleaning the flame arrester core components, high-pressure steam, non corrosive solvents, or compressed air should be used for blowing, and sharp hardware brushes should not be used.

6 When reinstalling the fire-resistant layer, the gasket should be updated to confirm that the sealing surface is clean and undamaged, and there should be no air leakage.

Shanghai Nanshi is a professionalManufacturer of flame arresters for corrugated storage tanksThe products produced by the company include breathing valves, flame arresters, fire-resistant breathable caps, fire-resistant vacuum pressure caps, aluminum alloy ball valves

Aluminum alloy single flange ball valve, oil discharge port, double door bottom valve, oil measuring hole and other supporting accessories.

Welcome to visit our website【http://www.shhxfcj.com】,If you have any questions.You can call us,WeWe will do our best to provide you with high-quality service.

Telephone:.