-
E-mail
cxyjx1985@126.com
-
Phone
13982020315,13688380208
-
Address
No. 108, Group 9, Tashui Community, Banzhuyuan Town, Xindu District, Chengdu City
Chengdu Changyuan Machinery Equipment Co., Ltd
cxyjx1985@126.com
13982020315,13688380208
No. 108, Group 9, Tashui Community, Banzhuyuan Town, Xindu District, Chengdu City
The cement tank is mainly composed of cement tank legs, valves, screw conveyors, cement arch breaking devices, tank bodies, stairs, level gauges, and top dust collectors.
Cement tanks are suitable for storing various dry small particle materials or powders, such as cement, fly ash, dry sand, chemical powder, thickening powder, additives, etc. It is usually applied to transfer bulk cement in mixing plants, dry mortar factories, highways, railways, tunnels, bridges, docks, and other places.
50T, 80T, 100T, 120T, 150T, and 200T cement tanks are common specifications and can also be made according to customer requirements.
1. First, according to the basic requirements in the schematic diagram, prepare the overall concrete foundation, embed the anchor bolts, and install the anchor bolt connection plate. The four foot plates should be calibrated to be on the same horizontal plane. After the foundation is dry, tighten the nuts.
2. Check for any damages or loose connections during transportation, and repair and tighten them.
3. Lift into place (pay attention to the feeding direction and escalator orientation), and weld the tank feet firmly to the ground plate.
1. Before use, open the discharge valve and check if there are any debris inside the tank.
2. Close the discharge valve precisely before loading.
3. Regularly check whether the bag inside the dust removal device has too much dust, and remove it. If there is any damage, replace it in a timely manner to avoid powder spraying during feeding.


Building materials mortar cement tank

Cement tank manufacturing site

Cement tank manufacturing workshop