CFFL series – foam insulated flexible transmission pipeline

Product introduction This infusion tube is an upgraded product of non adiabatic infusion tube. The outer surface of the infusion tube is covered with neoprene (diene) rubber foam, and the outer surface of the foam is protected with mesh. For small-scale and intermittent transmission, this pipeline will not appear frosting, which can improve the transmission efficiency to a certain extent. Most of this pipeline is used to transmit liquid nitrogen. Because this pipeline has connecting parts at the terminal, local frosting will occur at the outlet and inlet. The foam will freeze along the pipeline, making the pipeline lose flexibility, so the pipeline is fragile and broken. It is mostly used in low-pressure transmission, and the pressure generally needs to be less than 90

Introduction to CFFL transmission pipeline products

This infusion tube is an upgraded product of non adiabatic infusion tube. The outer surface of the infusion tube is covered with neoprene (diene) rubber foam, and the outer surface of the foam is protected with mesh. For small-scale and intermittent transmission, this pipeline will not appear frosting, which can improve the transmission efficiency in a certain extent. Most of this pipeline is used to transport liquid nitrogen. Because this pipeline has connecting parts at the terminal, local frosting will occur at the outlet and inlet. The foam will freeze along the pipeline, making the pipeline lose flexibility, so the pipeline is fragile and broken. It is mostly used in low-pressure transmission. The pressure generally needs to be less than 90 PSI, and the maximum pressure borne mainly depends on the inner diameter of the pipe The inner diameter can be 1/4 ", 3/8" and 1/2 ", and the length can be customized according to the user's needs.