Cable fault tester

NegotiableUpdate on 01/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The cable fault tester is widely used in the field of power cable testing, constantly pursuing quality and striving for innovation in product development and research. The cable fault pre positioning test host is a masterpiece of the company, with technology reaching a corresponding level, breaking the monopoly of many companies in this field. The cable fault pre positioning test host adopts high-level technology, making it easy and enjoyable to determine the fault distance. The cable fault pre positioning test host is used to detect high resistance leakage faults, flashover faults, low resistance grounding and open circuit faults of various power cables.

Product Details

1Cable fault testerKey Features:

◆Capable of detecting high and low resistance faults in all cables below 35KV, with a wide range of applications.

◆Featuring user-friendly software and a fully Chinese menu. The button definition is simple and clear. The measurement method is simple and fast.

◆The success rate of fault detection, testing accuracy, and ease of testing are superior to any type of testing equipment.

◆As a display terminal, the instrument has powerful data processing capabilities and a friendly display interface with a large touch LCD screen.

◆It has extremely safe sampling high-voltage protection measures. The testing instrument will not crash or be damaged in an impact high-pressure environment.

◆No testing blind spots.

◆Built in power supply, capable of testing cable open circuit and low resistance short circuit faults in non powered environments.

IICable fault testerRated parameters:

◆Testing methods: Low voltage pulse, high voltage flashover, speed measurement.

◆Impact high voltage: power cables below 35KV.

◆Data sampling rates: 80MHz, 40 MHz, 20MHz, 10 MHz.

◆Test distance:>30Km.

◆Reading resolution: 1m.

◆System testing accuracy: less than 50cm.

◆The pulse width of the test cable is set to "0.05", "0.1", "0.2", "0.5", "1", "2", and "8" microseconds.

◆It has the function of storing test waveforms: it can conveniently store the waveforms tested on site in the instrument in the specified order for easy access and observation at any time. It can store a large number of on-site test waveforms.

◆The measured fault point waveform and the full-length open circuit waveform of the good phase can be displayed on the screen for same screen comparison and overlay comparison, and the fault distance can be automatically determined.

◆ 10.4-inch full-color touch screen.

◆Built in power supply: The instrument can work continuously for more than 3 hours after being fully charged, and can also be operated with an external AC power supply.

◆Working conditions: Temperature range of -10 ℃ to+45 ℃, relative humidity of 90%.

IIICable fault testerSystem composition:

◆One cable fault pre positioning test host (distance measurement host)

◆Intelligent positioning devicea

◆Pathfinder a

◆One lightweight high-voltage generator

◆One signal sampling line

◆One instrument charger

◆One current sampling box

◆One user manual for the instrument