Cable joint RFID radio frequency wireless temperature measurement device

Cable joint RFID radio frequency wireless temperature measurement device

1. Product Overview

The ATE800 series RFID wireless temperature measurement device can be used for temperature monitoring of metal parts such as busbar contact points, circuit breaker contacts, cable joints, etc. in medium voltage switchgear. It has the characteristics of isolation, easy installation, strong anti-interference ability, and reliable operation.ATE800Cable joint RFID radio frequency wireless temperature measurement deviceProduct composition: receiver, antenna, sensor. The ATC800 receiver transmits RFID radio frequency signals to the ATE800 wireless temperature sensor through the antenna. After the sensor receives the radio frequency energy, it activates the circuit to start temperature data collection and sends the data back to the antenna through wireless signals; The antenna transmits data to the receiver through an RF cable, and the receiver can ultimately upload the data to the remote monitoring system.

2. Model Description

3. Configuration plan

4. Technical indicators

5. Product installation

There are multiple models of ATE800 wireless temperature sensors, corresponding to strap type fixation, bolt type fixation, and other installation methods.

5.1 Overall dimensions

5.2 Installation method

The ATE800-B strap type wireless temperature sensor is suitable for circuit breaker moving contacts, cable joints, and other locations.

ATE800-B Band Wireless Temperature Sensor Structure Description

1. Strap

2- Wireless temperature sensor body

Fix the sensor body in the installation position, wrap the strap around the installation busbar or thread the contacts through the strap, tighten the strap head, and finally lock the strap tail with a lock buckle. The strap length is 404mm. If the strap is too long, excess parts can be cut off. If the strap is too short, please contact our company for additional information.

The ATE800-U bolt type wireless temperature sensor is suitable for cable joints, copper bars, and other locations.

Structural description of bolt type wireless temperature sensor:

1-Bolt fixing hole

2- Wireless temperature sensor body

Remove the screws at the overlap of the installation position, fix the sensor in the installation position, align it with the opening on the alloy base plate, and then tighten the screws to secure it.

6. Install instance

Installation instructions for temperature measurement of medium voltage circuit breaker contacts

The installation positions of the sensor and receiver antenna in the circuit breaker room are shown in the following figure. Figure 1 shows the installation position of the ATE800-B strap sensor on the moving contact of the circuit breaker, and Figure 2 shows the installation position of the antenna. When the antenna is installed on the right cabinet wall of the circuit breaker room, the direction of the sensor body should face the antenna position, as shown in Figure 1, ensuring that the direction of the sensor body and the antenna are in a face-to-face state.