Inverter communication three-phase dual circuit energy meter

Inverter communication three-phase dual circuit energy meter

1. Product Overview

The ADL200M 400M series external transformer dual circuit energy meter is an intelligent instrument designed mainly for new energy generation systems such as photovoltaic grid connected systems, micro inverter systems, energy storage systems, and AC coupling systems. The product has the advantages of high accuracy, small size, fast response speed, and easy installation.Inverter communication three-phase dual circuit energy meterIt has the ability to sample, measure, and monitor power parameters, communicate with inverters or energy management systems (EMS), and achieve functions such as preventing backflow, adjusting power generation, and battery charging and discharging based on real-time power and accumulated energy. It can measure in both directions and achieve distributed photovoltaic energy management for household use.

2. Model Description

3. Function List

4. Technical parameters

5. External dimensions

5.1 Instrument dimensions (unit: mm)

Attention: The size engineering is 1mm

5.2 Transformer size (unit: mm)

Note:The yellow wire in the lead section of the transformer is connected to phase A, the green wire is connected to phase B, and the red wire is connected to phase C. The tolerance for size C is 1mm.

6. Security measures

Danger of electric shock, explosion, and arc light

•Please wear personal protective equipment (PPE) and comply with electrical operation safety regulations.

This product does not require trial operation before use.

Before starting to work on this device, please turn off all power sources of this device and the devices with this device installed.

Be sure to use voltage sensing equipment with the correct rated voltage to confirm that all power sources have been turned off.

Do not exceed the maximum limit of the equipment.

The safety of personnel or equipment in certain critical control or protection applications depends on the operation of control circuits. Do not use this device for such purposes.

Do not use water or any liquid materials to clean the product. Use a cleaning cloth to remove dirt.

The installation personnel are responsible for coordinating the rated value and characteristics of the power side overcurrent protection device with the maximum rated current. Violating these instructions will result in death or serious injury.

•If the device is not used in the manner specified by the manufacturer, the protection provided by the device may be compromised.