Clamp on ultrasonic flowmeter

The clip on ultrasonic flowmeter is a widely used, universal and economical clip on flowmeter with simple installation and operation, as well as reliable measurement performance. It is widely promoted in municipal sewage measurement, medicine, industry, etc.

Product Overview: Clamp on Ultrasonic Flow Meter

The clamp type ultrasonic flowmeter is a widely used, universal, economical, external clamp type, time difference method ultrasonic flowmeter. It has a very simple installation method, without breaking pipes or stopping water, just one clip, making it easy for customers to achieve flexible pipeline flow measurement. Easy to install in just a few minutes, suitable for various metal and resin pipes. The product can also be equipped with installation fixtures, which do not require daily maintenance and provide reliable and drift free data support for a long time.

feature

》No need to cut off the pipeline, simply attach the external sensor to the surface of the pipeline to complete the flow measurement

》Wide measurement range, select corresponding sensor, can measure flow rate of different pipe diameters and diameters

》No pressure loss, easy installation and maintenance

》No need for long downtime for construction, installation can be easily completed in a few minutes.

》Suitable for various metal and resin pipes

》Industrial grade PFGA chip

》EEPROM (data storage length: over 10 years, data read/write frequency: over 1 million times)

》It can improve signal sampling frequency and bubble tolerance, handle more complex logic and operations, and achieve more accurate and faster measurements.

》The flowmeter can withstand discontinuous bubbles or impurities for 5 seconds.

》External clamp design, no need to touch the measuring medium. It can avoid pressure loss and medium pollution caused by traditional flow meters.

Technical Specifications

Supported pipeline materials: Hard plastic pipes such as metal/PVC, PP or PVDF

Supported liquid media: water/other (single without solid particles and impurities)

Supported medium temperature: normal temperature ≤ 90 ℃, high temperature ≤ 160 ℃

Default low deviation resection value: 0.1 m/s

Display mode: 256 * 128 backlit LCD

Response time: 0.5-60 seconds

Accuracy level: ± 2%. After calibration, it can reach ± 1%

Data storage cycle: 300 milliseconds

Memory backup: EEPROM (data storage length: over 10 years, data read/write frequency: over 1 million times)

Power supply and 1/o connector: M12 aviation plug

Output: 4-20 mA

Communication: Modbus RS485

(Optional Output): OCT (Pulse Output)/One way Relay Alarm (Please contact the factory for details)

Power supply: 10-24VVDC

Electric power: less than 3W

Protection circuit: power reverse protection, power surge protection

Shell protection level: IP65

Environmental temperature: Host -20 ° C~+50 ° C; Sensor -20 ℃~+120 ℃ Normal temperature ≤ 90 ℃ High temperature ≤ 160 ℃

Relative humidity: 35 to 85% RH (non condensing)

Vibration resistance: 10 to 55Hz, double amplitude of 1.5mm, 2 hours for each XYZ axis

Impact resistance: 100m/s 216ms pulse, 1000 times on each XY and Z axes

Material of the whole machine: aluminum alloy, industrial plastic

Cable length: standard 2 meters, (PT1000 standard 9 meters)