-
E-mail
497343898@qq.com
-
Phone
152-3782-8699
-
Address
No. 109, Middle Section of Weidu Road, Kaifeng City
Product Categories
Kaifeng Shengda Water Meter Co., Ltd
LDQ type submersible electromagnetic flowmeter
NegotiableUpdate on 09/22
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The LDQ submersible electromagnetic flowmeter consists of an LDQ submersible electromagnetic flow sensor and an H200B electromagnetic flow converter. Used for continuous measurement of the volumetric flow rate of conductive liquids in open channels, culverts, or pipelines. At present, this type of flowmeter has been widely used in urban water supply and drainage, industrial waste
Product Details
LDQType submersible electromagnetic flowmeter
The LDQ submersible electromagnetic flowmeter consists of an LDQ submersible electromagnetic flow sensor and an H200B electromagnetic flow converter. Used for continuous measurement of the volumetric flow rate of conductive liquids in open channels, culverts, or pipelines. At present, this type of flowmeter has been widely used for flow measurement in urban water supply and drainage, industrial wastewater discharge, sewage treatment, farmland irrigation and other departments.
Features:
In addition to the characteristics of LD type electromagnetic flowmeter, it also has the following features:
Suitable for measuring open channels, underground channels, and river channels, suitable for measuring circular, rectangular, trapezoidal, and other shapes of channels, unaffected by river water rise, tides, and downstream water level changes; The use of simulated sensors (diversion model) can expand the range of flow measurement.
Main technical indicators:
1. The nominal meridian; DN50、100、200、400、600 800
2. * * Degree level: 1.5, 2.5 (when used with simulated sensors)
3. Measurement range (flow velocity): 0m/s -10m/s
4. Conductivity of the tested medium: greater than 10uS/cm
5. * Large diving depth: (diving type) 10m
6. Electrode Material: 316L. Titanium TI, Tantalum Ta, Hastelloy, Special Materials
7. Temperature range of the tested medium: 0C to+400C
8. Flow meter output signal: 4mA -20mA, 0Hz -5kHz, upper and lower limit alarms, etc
9. Communication method: RS485, (RS232, MODBUS, HART, PROFIBUS-DP, etc. are optional)
The LDQ submersible electromagnetic flowmeter consists of an LDQ submersible electromagnetic flow sensor and an H200B electromagnetic flow converter. Used for continuous measurement of the volumetric flow rate of conductive liquids in open channels, culverts, or pipelines. At present, this type of flowmeter has been widely used for flow measurement in urban water supply and drainage, industrial wastewater discharge, sewage treatment, farmland irrigation and other departments.
Features:
In addition to the characteristics of LD type electromagnetic flowmeter, it also has the following features:
Suitable for measuring open channels, underground channels, and river channels, suitable for measuring circular, rectangular, trapezoidal, and other shapes of channels, unaffected by river water rise, tides, and downstream water level changes; The use of simulated sensors (diversion model) can expand the range of flow measurement.
Main technical indicators:
1. The nominal meridian; DN50、100、200、400、600 800
2. * * Degree level: 1.5, 2.5 (when used with simulated sensors)
3. Measurement range (flow velocity): 0m/s -10m/s
4. Conductivity of the tested medium: greater than 10uS/cm
5. * Large diving depth: (diving type) 10m
6. Electrode Material: 316L. Titanium TI, Tantalum Ta, Hastelloy, Special Materials
7. Temperature range of the tested medium: 0C to+400C
8. Flow meter output signal: 4mA -20mA, 0Hz -5kHz, upper and lower limit alarms, etc
9. Communication method: RS485, (RS232, MODBUS, HART, PROFIBUS-DP, etc. are optional)
Similar Product Recommend
