Cold and hot cylinder (aging cylinder)

detailed explanation

Stainless steel hot and cold cylinders are widely used for material heating, stirring, blending, cooling, insulation and other operations in industries such as dairy products, beverages, fruit wine, seasonings, oils, pigments, etc.

1、 Classification of stainless steel hot and cold cylinders

1. According to the heating medium, it can be divided into: steam heated hot and cold cylinders, electric heated hot and cold cylinders;

2. According to the entry and exit of materials, they can be divided into open hot and cold cylinders and closed hot and cold cylinders;

3. According to the structure, it can be divided into: ordinary cold and hot cylinders, upper and lower conical cold and hot cylinders, and upper and lower head cold and hot cylinders.

1Structure:

The device consists of an inner liner, jacket, insulation layer, outer sheath, reducer, mixing blade, thermometer, etc.

1Inner liner: made of stainless steel plate304Made of materials and polished on the surface.

2Middle jacket: using304Made of steel plate, reinforced with a spiral device, the cold water flows from bottom to top (without pressure) to achieve the purpose of raising and lowering temperature.

3Insulation group: It is made of stainless steel plate polished into a mirror surface, and the insulation layer is maintained at a certain temperature with perlite or glass wool to achieve insulation effect.

4Reducer: Cycloid pinwheel planetary reducer, fixed on the bracket in the crossbeam, the reducer wheel output shaft is connected to the mixing blade, using a loose coupling.

5Temperature gauge: specifications00C~1000CInstall the crossbeam and extend it straight to the lowest position of the medium, so that the liquid material can indicate the temperature even when it reaches the lowest position.

3、 Technical parameters

4、 Installation:

Adjust the support legs of the device to a horizontal line perpendicular to the reducer before installing each pipeline. During operation, be sure to rotate the mixing blade clockwise and not in reverse.

5、 Usage and maintenance:

1Explanation: Before using this device, the liquid storage tank must be cleaned with hot water and then disinfected with steam. The material slurry enters the cylinder through the material pipe fixed on the cylinder head, or is poured into the cylinder head when the cylinder head is opened. The material should not be filled too full to avoid splashing out when the material is stirred by the mixer, causing unsanitary environment or loss.

It can be customized according to user needs.