Computer tensile tester, peel strength testing machine, tensile testing machine, tensile strength testing machine

Computer tensile tester, peel strength testing machine, tensile testing machine, tensile strength testing machine

Product Introduction:

This product can mainly measure the tensile strength, compressive strength, compressive strength, tear resistance, peel resistance, adhesive strength, and physical properties of various materials. The test date, time, and display settings can be printed out. This machine can be equipped with various fixtures and elongation testing devices, or configured according to customer requirements. It is the basic equipment for quality management, incoming inspection, physical property testing, mechanical research, and material development.

Function:

V can perform tests such as tensile strength, static pressure, peeling, tearing, release force, three-point bending resistance, fixed force, fixed stroke, bending, etc;

vCan display both strength and deformation simultaneously; The time corresponding to strength; Displacement corresponding to time; The displacement curve corresponding to force;

Built in metric and imperial units, can be switched freely;

V quick disconnect test connector, which can be quickly replaced using various fixtures;

V can directly connect to the printer to output reports, and the report format can be edited by the customer themselves;

Fully computer operated, performing functions such as machine control, data analysis, and printing reports;

V transmission mode: ball screw, equipped with dust cover, protecting the screw, increasing service life and accuracy;

Ultra low silence, intelligent automatic power consumption adjustment, more energy-efficient and environmentally friendly;

Hardware security protection: upper and lower limits, emergency stop button protection.

Delivery: One set of standard testing fixtures;

Equipment name: Computer tensile stress tester

Equipment model: SGL-8000

Equipment brand: SUNGOLL/Shanggao

Control method: computer software+physical buttons

Capacity selection: 5, 10, 20, 25, 50, 200 kg (optional);

Unit switching: G, kg, N, LB;

Load decomposition degree: 1/250000;

It is possible to set the pressure to the set force value and maintain it for a set time;

Load accuracy: within ± 0.5%;

Travel: 600mm (excluding fixtures);

Test speed: 1~500mm/min can be adjusted arbitrarily;

Dimensions: (L × W × H) 500 × 440 × 970mm;

Weight: 75kg;

Power supply: 220V, 3A;

This product can mainly measure the tensile strength, compressive strength, compressive strength, tear resistance, peel resistance, adhesive strength, and physical properties of various materials. The test date, time, and display settings can be printed out. This machine can be equipped with various fixtures and elongation testing devices, or configured according to customer requirements. It is the basic equipment for quality management, incoming inspection, physical property testing, mechanical research, and material development.