Crown measuring instrument DLD-5KN electronic tensile machine

DLS-10

electronic testing machine5KN

Display mode: LCD display

skill

art

square

table

book

Beijing Guance Jingdian Instrument Equipment Co., Ltd

Product image:

Product model:DLS-5

1 Product performance characteristics:

The DLS series LCD display electronic testing machine meets the requirements of GB1040, GB13022, GB17200, GB16491, etc. This machine is widely used in the production and scientific research of raw materials and products such as plastics and rubber. The electronic tensile testing machine is suitable for chemical production enterprises, universities, and research institutes to determine the mechanical properties of materials Mainly used for testing materials such as plastic film, fabric, leather, monofilament, metal foil, etc This machine is widely used for inspection and analysis of metal, non-metal, and various composite materials. It is an ideal testing equipment for scientific research institutions, colleges and universities, industrial and mining enterprises, technical supervision, commercial inspection and arbitration departments.

The design of the DLS series LCD display electronic testing machine integrates and absorbs advanced control technology and exterior design from foreign testing equipment. The machine has a beautiful appearance, easy operation, and stable and reliable performance. The machine adopts a fully digital speed regulating motor and a fully digital speed regulating system as the driving device. After being decelerated by a circular arc synchronous belt and a circular arc synchronous belt wheel reduction system, it drives the precision screw pair to load This machine has the advantages of no pollution, low noise, high efficiency, high precision, small mechanical inertia, wide adjustment range, compact structure, easy operation, and stable performance

2、 Main technical indicators:

01. Maximum test force: Double column structure: 0-5KN

02. Test force display range: 0-5KN

03. Test force grading: no grading throughout the entire process

04. Measurement accuracy of test force: better than ± 1% of the indicated value

05. Displacement resolution: 0.01mm

06. Accuracy of displacement measurement: better than ± 1% of the indicated value

07. Control range of crossbeam movement speed: 0.05mm/min to 300mm/min

08. Displacement speed control accuracy: better than ± 1%

09. Stretching stroke: 0-800mm (excluding fixtures)

10. Dimensions: 850 × 650 × 1900 (mm)

11. Power supply: 220V, 50Hz

3、 Equipment configuration:

01. One high-strength host (portal structure)

02. One high-precision photoelectric encoder

03. One set of fully digital speed control system and one set of fully digital speed control motor

04. A set of precision screw pairs

05. A set of precision arc synchronous deceleration system

06. One high-precision sensor

07. A set of specialized stretching aids

08. One set of testing machine control system and large LCD display

4、 Function Introduction:

01Instantly switch speedDuring the experiment, three pre-set speeds can be switched instantly to save time

02Automatic shutdown:After the sample is damaged, the moving crossbeam automatically stops moving

03Display mode:The dynamic real-time display of test force, displacement, test speed, peak value, and test status during the test process is simultaneously displayed on the same LCD screen in real-time

04Automatic return:After the experiment is completed, the testing machine moves the crossbeam and automatically returns to the initial position of the experiment

05Limit protection:Equipped with both programmable and mechanical limit protection functions

06Overload protection:When the load exceeds 3-5% of the rated value, the equipment automatically stops working

07Automatic printing:Configure a micro printer to print the test data