DRX-II-PS (Transient Plane Heat Source Method) Thermophysical Parameter Tester

The instrument is mainly based on the thermal conductivity, thermal diffusivity, and specific heat capacity of the transient planar heat source technology. Widely used in fields such as electricity, automobiles, materials, and biopharmaceuticals. Provide a variety of probes, software, devices, and support for measuring the thermal conductivity of various types of materials.
Main features: 1 Directly measuring transient heat propagation, with testing time between minutes and seconds, can save a lot of time It will not be affected by contact thermal resistance like the static method No special sample preparation is required, only a relatively flat sample surface is needed Can be used for the determination of thermal properties parameters of solids, powders, coatings, films, liquids, anisotropic materials, etc
Main technical parameters
1. Thermal conductivity range: 0.005-500 W/mK 2, temperature range: 10K-1000 K
3. Material types: metal, alloy, ceramic, ore, composite material, silicon wafer, polymer, binder, paper, fabric, printed circuit board, propellant
4. Test modules: Basic, Thin Film, Flat Plate, Anisotropy, Single Side, Specific Heat
5. Probe size: 2-30mm
6. Sample types: solid, powder, film, coating, liquid, anisotropic material, etc
7. Accuracy: ± 3%
8. Other tests: Simultaneously measure the thermal diffusion coefficient of materials with an accuracy of ± 5% and the volumetric heat capacity with an accuracy of ± 7%