Deep water diving jet aerator

Deep water diving jet aerator

characteristic:

It is a mature product with a high oxygen dissolution rate, a large proportion of small bubbles, high oxygenation efficiency, and a wide oxygenation area;

There is no dead zone in the pool, and the horizontal exposure airflow carrying bubbles can completely flush every corner of the pool bottom;

The bearings with simple and compact structure, long unit life, and the ability to withstand high loads, as well as the use of oil bath shaft seals and air suction into the impeller chamber to prevent water from coming into contact with the seals during operation, ensure that the aerator can operate continuously for 24 hours without any faults for a long time;

Easy to use, saves engineering investment, eliminates the need for a gas source, eliminates the need for a blower, is easy to install, and has low noise.

Deep water diving jet aerator

Main features:

1. Compact structure, small footprint, and easy installation. The jet aerator consists of a submersible sewage pump, an aerator, and an intake pipe, with a compact structure and a small footprint; In addition, the jet aerator provides easy installation and maintenance.

2. High aeration efficiency and wide application range. Due to its high velocity jet, gas mixing, oxygen absorption rate, and high power efficiency. The efficiency can be shortened by 4 times compared to traditional aeration tank treatment and aeration time, and it is suitable for various sewage treatments, including push flow aeration tank, aeration tank mixing, delayed aeration tank, oxidation ditch, and oxidation pond.

3. The jet aerator system is simple and highly reliable. No fan or other equipment, simple system, except for the inlet, all others are submerged in water and operate with low noise; The selection of special cutting submersible sewage pumps and unobstructed jet aerators ensures safe and reliable equipment with a long service life.

4. Low investment and operating costs. Due to its suitability for aeration tanks, jet aerators can reduce footprint, have a simple system, save investment costs, have high processing efficiency, and save operating expenses .

5. The aeration disc is made of all stainless steel, which is corrosion-resistant and durable.

The function and characteristics of a submersible aerator include a submersible sewage pump, a mixing chamber, a base, an intake pipe, and a muffler. The upper end of the intake pipe is located on the water surface, and the lower end of the air inlet pipe is connected to the mixing chamber. High speed water flows from the impeller outlet through the mixing chamber to form negative pressure, allowing air to be drawn in and mixed with liquid. Due to the strong water jet, it causes effective flow of water, resulting in the air being cut into many small bubbles. Greatly improving its surface area, and due to the slow rise of bubbles, a large amount of oxygen dissolves in the air, making its power efficiency superior to other types of aerators.

The submersible aerator has a compact structure, small footprint, and easy installation. Except for imports, the rest of the water runs with low noise. Inhale air, the number of air bubbles increases, and the oxygen content is high. No need to provide gas source, eliminating the need for fans and reducing project investment. The structure adopts a new process design, with a light overall weight and safe and reliable operation.