Production of regulating pool submersible mixer

Production of regulating pool submersible mixerAlso known as submersible thrusters, they are suitable for propelling and stirring wastewater containing suspended solids, slurry, industrial process liquids, as well as aeration tanks and anaerobic tanks in industrial and urban wastewater treatment plants in the process flow of sewage treatment plants. They can be used to create water flows during water circulation, nitrification, denitrification, and phosphorus removal stages in the tank. According to the different process requirements of sewage treatment plants, the selected flow rate of the mixer should be between 0.15-0.3/s. If the flow rate is lower than 0.15/s, the effect of push flow mixing cannot be achieved. If the flow rate exceeds 0.3m/s, it will affect the process effect and cause waste.

Production of regulating pool submersible mixercharacteristic:

1. Compact structure, small size, light weight, easy operation and maintenance, convenient installation and maintenance, and long service life.
2. The product uses a multi pole motor with a direct connection structure, which has low energy consumption and high efficiency; The impeller is formed by precision casting or stamping, with high precision, large thrust, beautiful and smooth appearance, and compact structure.
3. Adopting a cycloidal pinwheel reducer, equipped with low power, low speed, large impeller diameter, and wide service area. The impeller is made of polyurethane material and aluminum alloy, with high strength and strong corrosion resistance. In addition to its stirring function, it also has the functions of pushing and creating water flow.
4. The motor winding has F-class insulation and a protection level of IP68. When used in conjunction with the aeration system in sewage treatment plants, it can greatly reduce energy consumption and significantly increase oxygen filling, effectively preventing sedimentation.

Installation precautions:
1. The guide rod or guide wire should be perpendicular to the horizontal and can be calibrated with a lead hammer;
When lifting a submersible mixer, the lifting hook should tilt the impeller end 5 ° -10 ° above the horizontal plane
3. By adjusting the chain on the lifting device, the lifting hook and the lifting center of gravity of the submersible mixer are on the same vertical line during the sliding process of the submersible mixer along the guide rod or guide wire.