Digital pit depth measuring instrument

Product Introduction:

Digital pit depth measuring instrumentIt is easy to use and can directly display readings. It is mainly used for measuring the depth of corrosion pits on heated pipes caused by wear and corrosion, local thinning of pipe walls, and corrosion of pipes. It can also be used for measuring the depth of small holes in mold injection molding, mechanical processing, and vessel manufacturing.

Features of the digital pit depth measuring instrument:

1. The range and accuracy are optional, making it convenient to combine them in pairs.

2. Digital display of the measured pit value, intuitive and convenient.

3. It is very convenient to use and can directly display readings.

4. The rectangular test base at the bottom can be used to measure both flat and partially convex surfaces.

5. The base surface adopts an open type, which facilitates the observation of the contact degree between the test needle and the tested pit, reducing the error of perception.

Technical Specifications:

Measurement range: 0-10mm

Resolution: 0.001mm

Measurement base size: 60mm

Measurement base material: metal

Measuring rod diameter: ≤φ 1.5mm

Protection level: IP54

Power supply: 1.5V button battery

Working conditions:

Temperature: 0 ° C~+40C

Relative humidity:<80%

Storage and transportation temperature: -10 ° C~+60 ° C

Preparation before use:

1. Install batteries inside the instrument.

2. Instrument integrity check, check whether the appearance of the instrument is complete and whether the organic glass above the display screen is damaged.

3. Instrument performance inspection, testing whether the instrument can work normally.

4. Turn on the power button of the startup program. Operation steps:

1. Apply millimeter and inch conversion buttons according to the situation.

2. Place the instrument on the surface of the component to be measured, and adjust the balance bar according to different surfaces.

3. After zeroing, place the instrument at the testing location to display the value of the corrosion pit.

If you want to measure another set of data, repeat the above steps.

Shutdown program: When the instrument is not in use, press the switch button to turn off the instrument.

Digital corrosion pit depth measuring instrumentMaintenance and upkeep:

1. It should be kept clean regularly, handled gently, and wiped clean with a soft cloth after use.

2. The instrument should not be disassembled casually to avoid damage.

Digital corrosion pit depth gaugeAccessories included: instrument box, small wrench, two probes, one battery, instruction manual, certificate of conformity, warranty card, 50mL bottle of cleaning solution, one wiping cloth, one pair of gloves, and one zero adjustment base block.