Dry nitrogen blower QW-DCY-G type

Product Introduction

1.Nitrogen blowing apparatus is used for sample preparation in liquid phase, gas phase, and mass spectrometry analysis. It adopts internationally recognized technology to concentrate the sample by blowing nitrogen into the surface of the heated sample. This method has the characteristics of time-saving, easy operation, and easy control, and can quickly obtain the expected results.

2.Adopting solid-phase extraction pretreatment technology instead of traditional liquid extraction and chromatography techniques enables rapid separation and purification of samples. Replacing the commonly used rotary evaporator with nitrogen blowing for concentration greatly shortens the analysis time.

3.The nitrogen blowing device adopts a dry constant temperature heater, which has good heat transfer performance, uniform heat transfer, and is conducive to rapid heating and temperature control. Blow nitrogen onto the surface of the sample to achieve anaerobic concentration of the liquid sample. Blow pipes are independent of each other and will not cause cross contamination.

4The instrument consists of a dry constant temperature heater, PID control system, sample cell 9/25 station, blowing tube and blowing tube tray, sliding rod lifting frame, gas flow regulating valve, etc.

Specification parameters of ammonia blower:

Attachment List

1.One dry constant temperature heater

2.1 set of blow pipe tray (equipped with 9/25 station blow pipes and nitrogen flow control valves)

3.1 power cord

4.1 copy of instruction manual and warranty card