- Phone
-
Address
No. 18, North Zone 1, Xiaoluzhuang Industrial Park, Tianqiao District, Jinan City, Shandong Province
Product Categories
Jinan Zhongjian Chuangli Testing Machine Co., Ltd
Dynamic abrasive wear testing machine
NegotiableUpdate on 07/19
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Product Introduction: The dynamic load abrasive wear testing machine is a multifunctional experimental machine that can simulate various working conditions. It can be used to test the wear resistance of metal materials and various dry and wet abrasives under impact load or no impact load, contact or no contact, sliding or rolling friction. Through experiments, the wear caused by metal materials under different loads and interactions can be quantitatively measured, and the wear mechanism can be experimentally studied
Product Details
Product Introduction
Dynamic abrasive wear testing machineIt is a multifunctional experimental machine that can simulate various working conditions. It can be used for testing the wear resistance of metal materials and various dry and wet abrasives under impact loads or no impact loads, contact or non-contact, sliding or rolling friction conditions. Through experiments, the wear caused by metal materials under different loads and interactions can be quantitatively measured, and the wear mechanism can be experimentally studied.
This experimental machine can be used in scientific research institutions, colleges, and design departments engaged in metallurgy, mining, cement, building materials, transportation, electricity, agricultural machinery, etc. to study the wear and wear mechanism of metal materials, select metal materials reasonably, and also meet the needs of laboratory production inspection in machine manufacturing plants, metallurgical repair plants, and other factories.
Technical Parameter
Impact energy |
0-5J |
Hammer free fall height |
0-50mm |
Hammer weight |
10 kilograms |
Impact energy |
0.2-2 joules, 30 eccentric wheels, 2-20 millimeters; 2-5 joules, 35 off center wheels, 20mm to 50mm |
Number of impacts |
Replace pulleys of different diameters at 50, 100, 150, and 200 times per minute to adjust the number of impacts |
Lower sample shaft speed |
200 revolutions per minute |
Abrasive particle size |
0.1～4mm |
Abrasive flow rate |
0-50 kg/hour |
motor |
Y2-100L-6 |
Automatic shutdown range |
1-99999999 RPM |
Head dimensions |
980 × 440 × 1500 millimeters |
External dimensions of the electrical control box |
550 × 500 × 1680 millimeters |
Weight |
About 500 kilograms |
Similar Product Recommend
