-
E-mail
guangjiyibiao@163.com
-
Phone
13564795088
-
Address
17th Floor, No. 16, Lane 155, Xinyuan Road, Shanghai
Product Categories
Shanghai Guangji Automation Instrument Co., Ltd
EJA438E/Z embedded pressure transmitter
NegotiableUpdate on 12/22
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The EJA438E/Z embedded pressure transmitter adopts single crystal silicon resonant sensor technology, which is suitable for measuring the flow rate, liquid level, density, and pressure of liquids, gases, or vapors.
Product Details
EJA438E/Z embedded pressure transmitterIntroduction:
The EJA438E/Z embedded diaphragm sealed pressure transmitter adopts single crystal silicon resonant sensor technology, which is suitable for measuring the flow rate, liquid level, density, and pressure of liquids, gases, or vapors. EJA4388E/Z converts the measured differential pressure into a 4-20mA DC current signal output, which can measure, display, or remotely monitor static pressure. It has functions such as fast response, remote setting, and self diagnosis. Embedded membrane is used for small-sized flanges such as 1 inch, 3/4 inch, or 1/2 inch
The EJA-E series products offer BRAIN, HART/HART (1-5VDC) low-power models, FF fieldbus, and PROFIBUS PA communication protocols, with standard configurations certified for SIL 2 safety.
EJA438E/Z embedded pressure transmitterthe specifications
|
|
EJA438E/Z embedded pressure transmitter |
|||
H membrane box |
A membrane box |
B membrane box |
|||
rfw |
Convex flange |
||||
measurement range |
|
-100~500kPa |
-0.1~3.5MPa |
-0.1~16MPa |
-0.1~7MPa |
|
(-400~2000inH2O) |
(-14.5~500psi) |
(-14.5~2300psi) |
(-14.5~1000psi) |
|
Measurement range |
|
2.5~100kPa |
0.06~3.5MPa |
0.46~16MPa |
0.46~7MPa |
|
(25~500inH2O) |
(8.6~500psi) |
(67~2300psi) |
(67~1000psi) |
|
precision |
|
±0.2% |
±0.2% |
±0.2% |
±0.2% |
Protection level |
|
IP66/IP67，NEMA 4X |
|
||
Explosion proof specifications |
|
NEPSI , FM，CENELEC ATEX，CSA，IECEx |
|||
output signal |
|
4-20mA DC, BRAIN, HART/HART (1-5V DC) low power consumption, FOUNDATION ™ Fieldbus or PROFIBUS PA two-wire digital communication |
|||
power supply |
|
BRAN and HART: 10.5~42V DC (ordinary and explosion-proof) 10.5~32V DC (with lightning arrester) 10.5~30V DC (intrinsic safety, n-type, non flammable) Digital communication (BRAN and HART: minimum 16.6V DC) HART (1-5V): 9-28V DC |
|||
|
Fieldbus: 9~32V DC (Intrinsic Safety Entity Mode: 9~24V DC, Intrinsic Safety FISCO Mode: 9~17.5V DC) |
||||
ambient temperature |
|
-40~60℃(-40~140℉) (普通型) |
|||
|
-30~60 ℃ (-22~140 ℉) (internal display table) |
||||
|
The ambient temperature must be within the working temperature range of the filling fluid |
||||
process temperature |
|
-50~250℃ (-58~482℉) |
|||
|
The ambient temperature must be within the working temperature range of the filling fluid |
||||
The biggest work pressure |
Rated pressure of flange |
||||
install |
|
Transmitter: 2-inch tube installation |
|||
|
Diaphragm seal: flange installation |
||||
Flange size |
|
Flat flange type: 3-inch (80mm), 2-inch (50mm), 1 1/2-inch (40mm) |
|||
|
Convex flange type: 4-inch (100mm), 3-inch (80mm) |
||||
|
Combination type: |
High pressure side of convex flange: 4-inch (100mm) |
|||
|
|
Flat flange low pressure side: 3-inch (80mm) |
|||
Diaphragm material |
|
316 SST 316LSST， Hastelloy C-276, tantalum, titanium, nickel, Monel |
|||
Flange material |
|
S25C，304 SST，316 SST |
|||
shell |
|
Cast aluminum alloy, corrosion-resistant cast aluminum alloy, ASTM CF-8M stainless steel |
|||
Similar Product Recommend