EJA440E high pressure transmitter

NegotiableUpdate on 12/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The EJA440E high-pressure transmitter adopts monocrystalline silicon resonant sensor technology, which is suitable for measuring the flow rate, liquid level, density, and pressure of liquids, gases, or vapors.

Product Details

EJA440E high pressure transmitterIntroduction:

The EJA440E high-performance pressure transmitter adopts monocrystalline silicon resonant sensor technology, which is suitable for measuring the flow rate, liquid level, density, and pressure of liquids, gases, or vapors. The EJA440E converts measured differential pressure into a 4-20mA DC current signal output, which can measure, display, or remotely monitor static pressure. It has functions such as fast response, remote setting, and self diagnosis.

The EJA-E series products offer BRAIN, HART/HART (1-5VDC) low-power models, FF fieldbus, and PROFIBUS PA communication protocols, with standard configurations certified for SIL 2 safety.

EJA440E high pressure transmitterthe specifications

		EJA440E high pressure transmitter
		C membrane box	D membrane box
measurement range		-0.1~32MPa	-0.1~50MPa
		(720~4500psi)	(-14.5~7200psi)
Measurement range		5~32MPa	5~50MPa
		(720~4500psi)	(720~7200psi)
precision		±0.055%	±0.055%
Protection level		IP66/IP67，NEMA 4X
Explosion proof specifications		NEPSI , FM，CENELEC ATEX，CSA，IECEx
output signal		4-20mA DC, BRAIN, HART/HART (1-5V DC) low power consumption, FOUNDATION ™ Fieldbus or PROFIBUS PA two-wire digital communication
power supply		BRAN and HART: 10.5~42V DC (ordinary and explosion-proof) 10.5~32V DC (with lightning arrester) 10.5~30V DC (intrinsic safety, n-type, non flammable) Digital communication (BRAN and HART: minimum 16.6V DC) HART (1-5V): 9-28V DC
		Fieldbus: 9~32V DC (Intrinsic Safety Entity Mode: 9~24V DC, Intrinsic Safety FISCO Mode: 9~17.5V DC)
ambient temperature		-40~85℃ (-40~185℉) (普通型)
		-30~80 ℃ (-22~176 ℉) (internal display table)
process temperature		-40~120℃ (-40~248℉) (普通型)
Zui large overvoltage		48MPa (6750psig)	60MPa (8500psig)
install		2-inch pipe installation
Material of liquid receiving components	bellows	F316L SST or 316L SST (diaphragm: Hastelloy C-276)
	Container flange	F316L SST
shell		Cast aluminum alloy, corrosion-resistant cast aluminum alloy, ASTM CF-8M stainless steel