Explosion proof sheathed electric heater/SRY2-2-380V/1KW

Military door flap hydraulic station heater HRY3-380/2

1Explosion proof sheathed electric heater/SRY2-2-380V/1KWProduct Introduction

It can be installed on the top plate of fuel tanks and containers, making it easy to disassemble, inspect, and replace. It is safer and more reliable than when installed on the side of the fuel tank, eliminating the possibility of oil leakage due to connecting flanges and gaskets. The electric heater can be replaced without draining the oil tank. Save the maintenance space for replacing the electric heater on the side of the fuel tank.

IIExplosion proof sheathed electric heater/SRY2-2-380V/1KWPurpose:

Electrostatic precipitator cathode vibration heater \ \ 1KW U-shaped 750mm longCathode ceramic shaft electric heater LD4.1.9B*Mainly used for heating media in hydraulic lubrication, it can also be used to heat non corrosive gases.

IIIMilitary door flap hydraulic station heater HRY3-380/2Features:

1. This electric heater is a top mounted angle ruler type electric heater, which can be installed on the top plate of oil tanks and containers, and is easy to install, disassemble, inspect, and replace. It is safer and more reliable than when installed on the side of the fuel tank, eliminating the possibility of oil leakage due to connecting flanges and gaskets. The electric heater can be replaced without draining the oil tank. Save the maintenance space for replacing the electric heater on the side of the fuel tank.
2. The A size of the electric heater can be customized by the user according to their needs. There are various specifications for surface load to choose from, and reasonable selection can prevent oil carbonization and burning; Safe and reliable, extending the service life of the medium. The installation hole of HRY10 type is Φ 20, and the A and B sizes of various specifications of heaters can be customized according to the usage environment.
3. Special voltage power electric heaters can be produced according to customer requirements, and temperature control devices can be added to the heater according to actual situations.

4、 Main technical parameters:

1. Metal tubular electric heating element
Rated voltage: 220V, 380V
The metal tube of the component allows high temperatures of 170 ℃ -400 ℃
Heating medium: mineral oil, water
Electric heater power 1-6 (KW)
Surface load of electric heater 4.4 w/cm2 1.2 w/cm2 0.7 w/cm2
2. The electric heater extends into the medium of the box and the heating length of the electric heating tube