Frost resistant magnetic flap level gauge

NegotiableUpdate on 01/09

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The anti frost magnetic flap level gauge is composed of a thermal insulation jacket installed outside the main body of the basic model, which is connected to a heat medium such as steam

Product Details

Frost resistant magnetic flap level gaugeIt is to install an insulation jacket outside the main body of the basic model to form a passage of heat medium such as steam. It can maintain the normal flow of liquid inside the main body. Therefore, it is suitable for liquid level measurement and control of easily solidified liquids. For low boiling point liquids, cold water or other refrigerants can be introduced to ensure the stability of the liquid level. Make the instrument correctly indicate the measured liquid level.

Frost resistant magnetic flap level gaugeThe series of products can achieve high sealing, leak prevention, and safe and reliable measurement of liquid level under high temperature, high pressure, high viscosity, and strong corrosive conditions. The entire measurement process has no blind spots, eye-catching display, intuitive reading, and a large measurement range. Equipped with liquid level alarm and control switch, it can achieve upper and lower limit alarm and control of liquid level or boundary. Equipped with liquid level transmitter, it can adjust the liquid level. The boundary signal is converted into a standard signal of 4-20mADC in a two-wire system, enabling remote detection, indication, recording, and control.

frost preventionMagnetic flap level gaugeTechnical parameters

Basic type
Measurement range: Within H=0-6000mm, users can choose freely
Indication accuracy: ± 10mm
Medium density: ≥ 0.45g/cm3
Medium viscosity:<1ST (10-4m2/s)
Connection flange: (1) When PN2.5, 4.0MPa, the flange is JB/T82.2-94, DN25 PN4.0 movable convex flange.
(2) When PN6.3, 10.0, 16.0MPa, the flange is JB/T82.2-94, DN25 fixed flange.
(3) PVC material flange JB/T82.1-94, PN1.0MPa, DN32. Other flange standards (such as HGJ, GB, ANSI, etc.) should be specified by the design department and the user.

liquid level alarm
Output form: normally open and normally closed switch signal
Working life:>105 times
Power supply: 24VDC 220VAC
Contact capacity: 220VAC 2A
Alarm accuracy: ± 5mm
Environmental temperature: -40~± 60 ℃
Outlet connector: internal thread M20 × 1.5
Explosion proof mark: Explosion proof type d Ⅱ BT4
Intrinsic safety type IB Ⅱ BT4
The inductance and capacitance of intrinsically safe laying cables shall not exceed 4.2mH and 0.13 υ F
Intrinsically safe type with safety barrier

Liquid level remote transmission device
Remote transmission range: 0~6000mm (optional)
Accuracy: ± 10mm
Return difference: ± 10mm
Output signal: 4~20mADC
Rated load resistance: 250 η
Power supply: 24VDC
Environmental temperature: -40~+60 ℃
Outlet connector: internal thread M20 × 1.5
Explosion proof mark: Explosion proof type d Ⅱ BT4
Intrinsic safety type IB Ⅱ BT4