HCW-I Automotive Storage Box Opening and Closing Comprehensive Performance Test Bench

HCW-IcarStorageBox opening and closing comprehensive performance test bench

Product Name:carStorageBox opening and closing comprehensive performance test bench

Product Model 2:HCW-I

Three main aspectsfunction:

This workbench is mainly used to test the opening and closing of car storage boxes,It is possible to generate separate curves for opening force, closing force, opening time, and opening frequency, and the curves can run through the entire experimental process. Raise an alarm when non conformities occur. At the same time, curves can be continuously generated under multiple experimental conditions (room temperature, high temperature, low temperature, high temperature, high humidity, etc.) and various standard requirements (i.e. different opening time qualification standards for different temperatures).

four、Specification:

1. Test bench host frame size: 900mm * 900mm * 900mm (length, width, height) (designed according to the user's given dimensions)
2. Frame material: Aluminum alloy profile frame（portability）
3. Bottom plate material:encloseboardelectrostatic sprayrust proof
4Pull force adjustment range: 0N-400N continuously adjustable
5Handdig or dig out with a finger or sth. pointedboxpull/openClose the cylinder

6Closing force adjustment range: 0N-400N continuously adjustable
7Pipeline diameter: ￠ 10MM
8System integrated air valve group: four stations and 12 channels
9Force value display method: The control system is equipped with a standard force measurement display.
10Electronic control system box: Programmable controller (FP0-32 series, Panasonic brand from Japan)
Execute relays and other ancillary electronic and electrical components (Chint brand)
11Weight of the whole machine: about 45 kilograms
12Machine movement method: base with casters (convenient for movement within the workshop)
13Test speed range: 10 times -120 times/MIN (this function is implemented by the speed sensor)
14Turn on the testing equipment and add a speed measuring device in handdig or dig out with a finger or sth. pointedThe calculation starts as soon as the handle of the glove box is pulled open, and the outer panel of the glove box automatically opens.
15Calculate the opening time and the number of openings per minute.
16Sensor model: spoke type C7-50

17Force measurement deviation: ± 1N;

18Speed deviation: ± 2%;

19Cycle time deviation: ± 2 seconds/time.

20Service life: More than 50 million cycles.

21One stand is used for each handdig or dig out with a finger or sth. pointedTesting of the box assembly and driver side guard glove compartment assembly.

five、Main implementation functions (hand)dig or dig out with a finger or sth. pointedBox and driver side rear panel glove compartment test):

1、It is possible to generate separate curves for opening force, closing force, opening time, and opening frequency, and the curves can run through the entire experimental process. Raise an alarm when non conformities occur. At the same time, curves can be continuously generated under multiple experimental conditions (room temperature, high temperature, low temperature, high temperature, high humidity, etc.) and various standard requirements (i.e. different opening time qualification standards for different temperatures).

2. The device can detect various glove boxes. (Set aside a compatible porous plate installation position in the glove box for rack installation)

3. Satisfy the experimental period, tentative settings, etc. For example, if the cycle is set to 4 times/min, after completing 100 cycles, stop and start again 100 times, and so on.

4. The equipment rack meets the requirements of high temperature of 120 ℃, -60 ℃, and high humidity (95%) for use.

5. The size of the test bench meets the size requirements of Hilda Corporation's high and low temperature experimental equipment. (The first party shall provide the internal dimensions of the high and low temperature boxes during production)

6. Activate and deactivate the power system: pneumatic actuators.

7. Software function: One software is divided into two sub software entrances, corresponding to glove box testing and side back panel glove box testing functions. During testing, three types of curves are drawn, including * large opening force frequency curve, * large closing force frequency curve, and opening time frequency curve. The experimental functions are divided into continuous testing and intermittent testing. Intermittent testing sets the number of times and interval time to achieve automatic cycling. The software control interface has a pause button, which can pause the test at any time and check the running status of the sample.