HT-UQS resistive level gauge

NegotiableUpdate on 12/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

HT-UQS resistive level gauge is used to detect, alarm, and automatically control powdered, granular, and block materials in open and closed silos. After long-term operation in industries such as steel, refractory, cement, rubber, chemical fibers, and electricity, ideal results have been achieved and widely used in industrial production. The UL-2LA resistive level gauge is a mechanical instrument with a simple structure, high temperature resistance, dust resistance, impact resistance, no complicated electrical circuits, reliable control, and long-term operation.

Product Details

HT-UQSObstructive level gaugeSuitable for controlling the material level in open or closed and pressurized containers during industrial production processes. When the material level reaches the high or low limit, the relay contact of the level gauge outputs an alarm or control signal. Product details of resistive level gaugeHT-UQSProduct Features1. Mechanical instruments with simple structure and high temperature resistance; 2. No complicated electrical circuits, accurate detection and reliable control; 3. Dustproof and impact resistant; 4. Can work for a long time and operate stably.HT-UQSMain parameters:1. Power supply voltage: AC220V, AC110V, DC24V; 2. Power consumption:<10W; 3. Output signal: passive signal output from relay; 4. Action frequency: 6 times/minute; 5. Environmental temperature: -40~85 ℃; 6. Work delay: 2-6 seconds; 7. Environmental humidity: ≤ 85%; 8. Medium temperature: ＜ 180 ° C; 9. Work pressure: ≤ 1.0MPa; 10. Detection board swing angle: 30 °± 5 °; 11. Flange connection size: Outer diameter of flange:? 195/ ? 160 hole center distance:? 160/ ? 130 aperture: 4-? 18 /4- ? 14. Hole size of silo:? 116/ ? 90； 12. Thread connection size: G11/2 "pipe thread; 13. Installation form: side mounted, top mounted. Working principle: The resistive level gauge adopts a swinging transmission system. When the detection board is blocked and stops, the motor continues to run, causing the switch to cut off the motor power and stop working. The internal switch sends out the corresponding material level signal. When the material level drops, the resistance of the detection board disappears, the release device resets, the motor resumes operation, the material level signal is issued, and the instrument is in the detection state again. In situations where the material level changes slowly, a timer can be installed inside the instrument to keep the detection of the instrument in an intermittent working state, which can reduce power consumption and wear, and extend the life of the instrument.

		UL-2	UL-3	UL-4	UL-K
Technical Specifications	power supply	AC220V，50Hz	同前	同前	同前
	power consumption	< 10W	同前	同前	同前
	output signal	Relay output or active signal	同前	同前	同前
	Action frequency	6 times/minute	4.5 times/minute	6 times/minute	6 times/minute
	ambient temperature	-40~85℃	同前	同前	同前
	overtime work	2-6 seconds	3-7 seconds	2-6 seconds	2-6 seconds
	Detect the swing angle	30°±5°		30°±5°	30°±5°
	ambient temperature	< 85℃	同前	同前	同前
	medium temperature	< 90℃，< 180℃	< 90℃，< 180℃	< 90℃，< 180℃	< 90℃，< 180℃
	Work pressure (MPa)	< 1.0	atmospheric pressure	< 1.0	< 1.0
Scope of Application	measure height	Fixed installation location determination	< 30m	同UL-2	同UL-2
	Medium particle size (mm)	< 30	< 100	< 30	< 40
	Medium density (kg/cm ³)	> 0.2	> 0.5	> 0.4	> 0.4
structural characteristics		Suitable for low temperature, strong corrosiveness, silicone rubber seal	Suitable for measuring large material warehouses	Stainless steel corrugated pipe fully sealed	316L corrugated pipe fully sealed
Flanges and openings	Outer diameter (D) mm	160		160	160
	Aperture (φ) mm	14		14	14
	Distance between hole centers (φ) mm	130		130	130
	Bin opening (diameter) mm	90		90	90
Installation method		Top mounted, side mounted	top loading	Top mounted, side mounted	Top mounted, side mounted
weight		8-11kg	20kg	8-11kg	8-11kg
connection type		G 1 1/2 "pipe thread DN65PN0.6 flange		G 1 1/2 "pipe thread DN65PN0.6 flange	G 1 1/2 "pipe thread DN65PN0.6 flange

Ordering Notice for Four Resistance Displacement Level Gauge

Please specify the tested medium, density, particle size, silo pressure, temperature, silo height, and any special requirements