HZD-B-8C-A2-B1 integrated vibration transmitter piezoelectric type

HZD-B-8C-A2-B1 integrated vibration transmitter piezoelectric type

The HZD-B-8C-A2-B1 integrated vibration transmitter is a new generation high-precision product developed for measuring the vibration of rotating machinery. Main features: good high and low frequency characteristics, long service life, simple and convenient installation. Suitable for vibration measurement and protection of various mechanical equipment shells such as high-speed fans, low-speed fans, water pumps, steam turbines, compressors, etc.

Introduction:

The HZD-B-8C-A2-B1 integrated vibration transmitter is an economical solution for mechanical vibration monitoring in factories. The applicable types of units include: electric motors, pumps, blowers, fans, engines, compressors, centrifugal separators, generators, steam turbines, turbochargers, rolling bearings, and gearboxes.

For the vibration protection of the vast majority of rotating machinery, speed is a factor*The monitored parameters. For gearboxes and rolling bearings, acceleration is one of the better choices. HZD-B-8C adopts a solid-state circuit power sensor, which can output acceleration and velocity, and provide proportional to the total vibration4-20mAOutput. This output can be directly connected toPLC/DCSOr other receivers4-20mASignal equipment connection, such as our company'sLH6000Monitoring system orLH6080Display unit. The HZD-B-8C integrated vibration transmitter is very easy to install and can be directly installed on the mechanical housing. Its vibration output value is the peak or effective value.

Features:

Measure shell vibration

Current output type(4-20mA)，2line system

Crystal circuit, no wear and degradation, good reliability

Installation at any angle

stainless steel casing

Electrical indicators:

Total vibration output:4-20mA(Circuit power supply)

frequency response(±3dB)：4～1000Hz

Natural frequency:30KHZ

Lateral sensitivity:< 5%

power supply15VDC～30VDC

Output impedance: ＜750Ω

7accurate indeed Degree: ±2％（+250C）

Physical indicators:

Overall dimensions:25*60

Structure: Cutting

Material: Stainless steel

Output connector2-Needle:MIL-C-5015

5Weight:300g

Environmental indicators:

Operating temperature:-350Cto+800C

Storage temperature:-400Cto+1000C

3Wet Degree:95%Non solidified

HZD-B-8C-A2-B1 integrated vibration transmitter piezoelectric type