Horizontal installation of metal tube float flowmeter

Horizontal installation of metal tube float flowmeter

The LZ500 metal tube float flowmeter is a metal structure float flowmeter suitable for measuring liquids and gases. The float moves upward under the action of fluid and buoyancy, and after balancing with the weight of the float, it is transmitted to the dial through magnetic coupling to indicate the corresponding flow rate, which can output a 4-20mA electrical signal.

The LZ series metal tube float flowmeter with a sturdy structural design can be widely used in flow measurement processes for complex, harsh environmental conditions and various media.

The LZ500 metal tube float flowmeter series products have multiple measurement forms for users to choose from according to different user needs and occasions; According to the output form, there are local indication type, remote transmission output type, and control alarm type; According to explosion-proof requirements, it can be classified into three types: ordinary type, intrinsic safety type, and isolated explosion-proof type.

Horizontal installation of metal tube float flowmeterProduct performance characteristics:

1. All metal structure design, sturdy, simple, resistant to high pressure, high temperature, corrosion, and long service life;

2. Short travel, total height of 250mm, easy to install;

3. Mechanical pointer indicates instantaneous flow rate on site, LCD displays instantaneous flow rate and cumulative flow rate;

4. Intelligent indicator, using foreign signal acquisition and processing chips, modular design, without hysteresis;

5. Equipped with data recovery, data backup, power down protection, and error self diagnosis functions;

6. HART type indicator, two-wire 24VDC power supply, 4-20mA standard current signal output;

7. Parameter configuration and on-site adjustment can be carried out through the HART communication controller;

8. Connect to the PC serial port and calibrate the instrument on site through a Windows program;

9. Can be used in flammable and explosive hazardous environments;

10. There are various installation forms such as vertical, horizontal, top and bottom out, bottom in and side out, and side in and side out, with flange or threaded connections.