IPX1-6 Rain Test Chamber

NegotiableUpdate on 01/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The IP1-6 rain test chamber is suitable for testing whether electrical products, enclosures, and seals can ensure good performance of equipment and components in a rainy environment. This product adopts scientific design, which enables the device to simulate various environments such as dripping, pouring, splashing, and spraying water realistically. By adopting a comprehensive control system and frequency conversion technology, the rotation angle of the rainfall test rack, the swing angle of the water spray swing rod, and the swing frequency of the water spray volume can all be automatically adjusted.

Product Details

IPX1-6 Rain Test ChamberCompliant with standards:

I in GB4208-2017 Degrees of Protection Provided by Enclosures (IP Code)PX1、IPX2、IPX3、IPX4、IPX5、IPX6Protection level;

IEC 60529:2013 Degrees of Protection Provided by Enclosures (IP Code), Part IPX1TheIPX2TheIPX3、IPX4、IPX5TheIPX6Protection level.

ISO20653:2006 Road vehicles - Protection levels (IP codes) - Protection of electrical equipment against foreign objects, water and contact - Part IPX1TheIPX2TheIPX3、IPX4、IPX5TheIPX6Protection level;

GB2423.38-2005 Environmental Testing for Electrical and Electronic Products Part 2 Test R Water Test Method and Guidelines IPX1TheIPX2TheIPX3、IPX4、IPX5TheIPX6Protection level;

IEC60068-2-18:2000 Environmental testing for electrical and electronic products Part 2 Test R Water test method and guidelinesPX1TheIPX2TheIPX3、IPX4、IPX5TheIPX6Protection level.

IPX1-6 Rain Test ChamberTechnical Specifications:

1）IPX12 parameter
Drip tank size	800×800mm（W*D)
Distance between drip tank and sample	200 mm
Drip hole diameter	φ0 .4 mm
Spray aperture spacing	20 mm
precipitation	IPX1:1+0.5mm/Min； IPX2:3+0.5mm/Min
IPX2 tilt angle	Equipped with a 15 ° tilting device
Test duration	10 minutes or more (adjustable)
Air pressure cleaning	After the experiment is completed, automatically drain the drip box water and then spray air3 minutes, time can be set. The purchaser shall provide a gas source of at least 5kg by themselves
2）IPX34 parameter
Spray hole diameter	0.4 mm
Spray aperture spacing	50 mm
Swing tube radius	400mm
Spray hole flow rate	1)Drizzle water within ± 60 ° of the vertical direction, with a maximum distance of 200mm; 2)Spray water within a range of ± 180 ° from the vertical direction; 2) Multiply L/min per well (0.07 ± 5%) by the number of wells
Nozzle angle	120°（IPX3）、180°（IPX4）
Swing angle	± 60 ° (IPX3), ± 180 ° close (IPX4)
Swing speed of sprinkler pipe	IPX3 15 times/min; IPX4 5 times/min
Test duration	10 minutes or more (adjustable)
Rainwater pressure	50~150kPa
3) IPX56 parameters
Number of sprinkler heads	2; One IPX5 nozzle and one IPX6 nozzle are included
Spray hole inner diameter	6.3 mm (IPX5 rating); 12.5 mm (IPX6 rating)
water spray flow rate	12.5 ± 0.625 (L/min) (IPX5 rating); 100 ± 5 (L/min) (IPX6 rating)
Spray distance	2.5 meters (distance from nozzle to turntable center)
pipe diameter	One quarter inch and one inch soft pressure tube each
Spray test time	At least 3 minutes or more (adjustable)
Spray pressure	30-100kPa (adjusted according to flow rate)
4) Rotary table system
turntable diameter	400 mm
Bearing capacity of turntable	20 kg
turntable speed	1-7 R/min (adjustable)