IPX5-6 Strong Spray Test Chamber

NegotiableUpdate on 12/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

IPX5-6 strong water spray test box integrates the technical requirements of the rain (waterproof) test standards for products in domestic automobile and motorcycle industries, Europe, America, Japan and Taiwan, China. $r $n is mainly suitable for external lighting, signal devices, and automotive lamp shell protection testing and inspection in scientific research institutions such as electronics and electrical engineering, aerospace, and Jungong.

Product Details

IPX5-6强喷水试验箱

IPX5-6 Strong Spray Test ChamberThe technical requirements of rain (waterproof) test standards for products in domestic automobile and motorcycle industries, Europe, America, Japan and Taiwan, China of China are integrated.

Mainly suitable for external lighting, signal devices, and automotive lamp shell protection testing and inspection in scientific research institutions such as electronics and electrical engineering, aerospace, and Jungong.

waterproof ratingintroduction：

For portable, outdoor, and automotive electronics, there are waterproof testing requirements, whether it is IECMILorETSIandSAECorresponding testing requirements have been formulated.

IEC/EN60529 Waterproof is divided into9A level(level0level8)Waterproof grade(e.g. IPX4-waterproof rating4)：Level 0:Waterproof without protection

Level 1: Vertical dripping should have no harmful effects

Level 2: The vertical surfaces of the shell are15When tilted within a range of degrees, vertical dripping should have no harmful effects

Level 3: Each vertical plane60Drip water within a range of degrees without harmful effects

Level 4: Splashing water in all directions towards the casing has no harmful effects

Level 5: Spray water in all directions towards the shell without harmful effects

Level 6: Strong water spray in all directions towards the shell without harmful effects

Level 7: Immerse the shell in water at a specified pressure for a specified period of time, and the amount of water entering the shell will not reach a harmful level

Level 8: According to the conditions agreed upon by both the manufacturer and the user (should be compared)Level 7After continuous diving, the amount of water entering the outer shell should not reach a harmful level

Level 9: High Voltage Test

IPX5-6 Strong Spray Test ChamberMain technical parameters:

1. Volume size
1.1 Test volume	1000 liters
1.2. Inner box dimensions	W1000×D1000×H1000mm
1.3. Outer box dimensions	Approximately W1600 × D1250 × H1860mm (excluding cone size) Approximately W4600 × D1250 × H1860mm (including circular dimensions)
2Technical Specifications
2.1. Rotary disc diameter		Φ500mm
2.2. Pipe diameter		IP5 has a diameter of 6 pipes, while IP6 has a diameter of 1 inch
2.3. Inner diameter of spray hole		1 IP5 (Φ 6.3mm) nozzle, 1 IP6 (Φ 12.5mm) nozzle
2.4 Spray pressure		30-150kPa (adjusted according to flow rate)
2.5 Spray flow rate		IPX5 (level) 12.5 ± 0.625 (L/min) flow can be directly adjusted through a frequency converter.
		IPX6 (level) 100 ± 5 (L/min) flow can be directly adjusted through a frequency converter.
2.6. Duration of Water Spray		3. 10, 30, 9999 minutes (adjustable)
2.7 Running time control		1M to 9999min (adjustable) Spray water per square meter on the surface of the shell, but the actual spraying time is less
2.8. The product is subject to water surface		Product side or top
2.9 Test Time		At least 3 minutes