Independently developed elastic recovery and compressive strain tester for impression materials

Independently developed elastic recovery and compressive strain tester for impression materialsIndependently developed elastic recovery and compressive strain tester for impression materials

1、 Instrument Introduction:

A testing instrument used to determine whether the material has the necessary elastic properties to properly recover from its deformed state when taking out impressions from oral or craniofacial tissues. A standard testing instrument for determining whether the elastic impression material has flexibility and rigidity after forming an impression.

2、 Reference standards:

YY 1027-2018

3、 Technical parameters:

Control panel: 7-inch color touch screen (optional Chinese and English interfaces)

Control system: industrial grade PLC+high-performance microprocessor

Operation mode: Full touch operation, can set, call, and modify test programs

Pressure testing range: 0-100N, other ranges and accuracies can be selected

Accuracy: 0.05% FS

Displacement speed: adjustable from 1-300mm/min

Displacement accuracy: 0.01mm

Test board: 15mm * 15mm thick 2mm

Compression amount: 4mm ± 0.1mm

Data output: elastic recovery, compressive strain

Optional computer: data traceability, curve display, high collection frequency

Printer: Embedded Mini Printer

One set of sample molding molds

Power supply: 220V 50HZ

4、 Configuration List:

1 host;

1 copy of instruction manual;

1 certificate of conformity;

1 warranty card;

One copy of the delivery receipt;

1 nameplate;

1 power cord;

1、 Instrument Introduction:

A testing instrument used to determine whether the material has the necessary elastic properties to properly recover from its deformed state when taking out impressions from oral or craniofacial tissues. A standard testing instrument for determining whether the elastic impression material has flexibility and rigidity after forming an impression.

2、 Reference standards:

YY 1027-2018

3、 Technical parameters:

Control panel: 7-inch color touch screen (optional Chinese and English interfaces)

Control system: industrial grade PLC+high-performance microprocessor

Operation mode: Full touch operation, can set, call, and modify test programs

Pressure testing range: 0-100N, other ranges and accuracies can be selected

Accuracy: 0.05% FS

Displacement speed: adjustable from 1-300mm/min

Displacement accuracy: 0.01mm

Test board: 15mm * 15mm thick 2mm

Compression amount: 4mm ± 0.1mm

Data output: elastic recovery, compressive strain

Optional computer: data traceability, curve display, high collection frequency

Printer: Embedded Mini Printer

One set of sample molding molds

Power supply: 220V 50HZ

4、 Configuration List:

1 host;

1 copy of instruction manual;

1 certificate of conformity;

1 warranty card;

One copy of the delivery receipt;

1 nameplate;

1 power cord;