The performance of epoxy resin gelation time tester is stable

NegotiableUpdate on 11/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The performance of the epoxy resin gelation time tester is stable. Hang a certain shape and buoyancy in the resin. The driving mechanism makes it perform a simple harmonic motion in the vertical and plane with a fixed amplitude. The plunger is deployed so that the plunger does rise during the upward operation, and falls freely at a speed not faster than the simple harmonic motion when it falls. The time from when all the curing agent is added to the resin until the resin gel can just support the downward force of the plunger and is automatically detected as the gel time.

Product Details

The performance of epoxy resin gelation time tester is stableThe performance of epoxy resin gelation time tester is stable

summary:

Hang a certain shape and buoyancy in the resin, and use a driving mechanism to make it move in a fixed amplitude in a vertical and flat plane in a harmonic motion, and adjust it so that the plunger does indeed rise during upward movement, and freely falls at a speed no faster than harmonic motion during descent. The time from when all the curing agent is added to the resin until the resin gel can just support the downward force of the plunger and is automatically detected as the gel time.

Execution standards:

GB 12007.7-89 Determination of gel Time of Epoxy Resin

Main technical parameters

1. Control system: PLC

2. Operating interface: 7-inch color touch screen

3. Plunger: The plunger is made of stainless steel material.

The plunger rod is approximately 100mm in length and 3mm in diameter

The diameter of the disc is 22.1-22.3mm, with a thickness of approximately 1.5mm.

The total mass of the plunger and the suspension link connecting the gel tester is 16.2 ± 0.02g.

4. Sample cylinder: cylindrical aluminum can,

Inner diameter 45mm,

Height ≥ 75mm

Thickness of aluminum wall: 0.5mm,

5. Speed: 0~30r/min can be set

6. Reciprocal stroke: 12.7mm

7. Constant temperature oil bath: RT~300 ℃ ≥ 2L Temperature control accuracy: ± 1 ℃

8. Power supply: AC 220V ± 10%, 50Hz;

9. Specification: 450 * 400 * 650mm

Basic configuration:

Test host: 1 copy

Instruction manual: 1 copy

Certificate of conformity: 1 copy

Receipt: 1 copy

Power cord: 1 piece

Wrench: 1 set

Product Introduction Sample Booklet: 2 copies