Installation Plan for BOQU Ammonia Nitrogen Analyzer - Ammonia Sensing Electrode Method NHNG-3010

Installation Plan for BOQU Ammonia Nitrogen Analyzer - Ammonia Sensing Electrode Method NHNG-3010
Installation Plan for BOQU Ammonia Nitrogen Analyzer - Ammonia Sensing Electrode Method NHNG-3010
Installation Plan for BOQU Ammonia Nitrogen Analyzer - Ammonia Sensing Electrode Method NHNG-3010

NHNG-3010Type online ammonia nitrogen monitoring instrument
The NHNG-3010 NH3-N fully automatic online analyzer is a developed ammonia nitrogen (NH3-N) automatic monitoring instrument with completely independent intellectual property rights. It is the world's instrument that uses advanced flow injection analysis technology to achieve online analysis of ammonia nitrogen. Capable of long-term unmanned automatic monitoring of NH3-N in various water bodies.
It can measure very low and high concentration ammonia nitrogen, and is suitable for laboratory or on-site online rapid analysis of ammonia nitrogen content in Rivers and Lakes, tap water, discharged wastewater, high concentration sewage and various solutions.
Key Features:
·Advanced flow injection analysis technology and safe and convenient analysis methods.
·The unique automatic enrichment function enables the instrument to have a large measurement range: 0.05mg/L-1500mg/L.
·The reagent is non-toxic and can be easily prepared with dilute NaOH and distilled water containing acid-base indicators.
·The unique gas-liquid separator (patented) eliminates the need for cumbersome and expensive pre-treatment devices for samples, eliminating the need for instrument cleaning. It is currently the most simplified instrument among various similar products.
·The operating and maintenance costs are extremely low.
·For samples with ammonia nitrogen concentration greater than 0.2 mg/L, ordinary distilled water can be used as the solvent for the reagent, which is convenient to use.
Technical Indicators:
Method basis: Salicylic acid spectrophotometric detection.
Measurement range:0-300 mg/L ammonia nitrogen (graded as 0)-10mg/L；10-150mg/L；10-300mg/L）.
Indication error:When ≥ 0.2 mg/L, not exceeding ± 10%;
＜At 0.2 mg/L, not exceeding ± 0.02 mg/L.
heavy again Sex: not exceed±3%
stable fixed Sex: Within 24 hours, it should be ≤ ± 10%.
Measurement cycle: *The small measurement cycle is30 Minutes,rootAccording to the on-site environment,
can beChange the color development time arbitrarily within 5-120 minutes
Sampling period: Time interval（10~9999min adjustable) and whole point measurement mode
Calibration cycle:Adjustable at any interval and time from 1 to 99 days
lose Out:4~20mA(2路) RS232、RS485
Environmental requirements: Indoor temperature adjustable, recommended temperature+5～28℃； Humidity ≤ 90% (non condensing)
electricity Source:AC220±10% V，50±10% Hz，5 A。
ruler Inch: Height1570 x width 500 x depth 450 mm.
Abnormal alarms and power outages will not result in data loss；Touch screen display and command input；
After abnormal reset and power failure, the instrument will automatically discharge residual reactants from the instrument and restore its working state.

Installation Plan for Domestic Online Ammonia Nitrogen Detection&Salicylic Acid Ammonia Nitrogen Tester&Ammonia Gas Sensitive Electrode Method Ammonia Nitrogen COD and Ammonia Nitrogen Analyzer