Insulation boot testing device, safety tool testing equipment

Key Features:

1Voltage, current, and time data are displayed on the same LCD screen with backlight, providing clear and intuitive readings.

2Full Chinese interface, simple and clear operation, wide applicability.

3The touch sensitive panel button operation allows all functions to be set through the buttons, improving the safety and reliability of the product.

4Adopting a combination of hardware and software anti-interference technology, it has stable performance and strong anti-interference ability.

5This testing device can test simultaneously6Leakage current of a circuit.

Working Principle:

access0~220VPower supply, adjust the power frequency withstand voltage test bench, and according to the electromagnetic induction principle of the test transformer, make the transformer generate0~30KVPower frequency high voltage is applied to each electrode to insulate the boots(glove)Obtain the specified test voltage. According to insulated boots(glove)Test procedures, reading and recording tests

Product Introduction:

Safety tools such as insulated rods, insulated screwdrivers, insulated pads, etc. can also be tested. It is designed and produced by our company based on the testing requirements of insulated boots (gloves) and in accordance with the opinions of our customers. This product effectively solves the problem of non-standard testing in the past, improves work efficiency, and ensures work safety. It is an ideal insulated boot (glove) equipment. The product adopts advanced microelectronics processing technology, and the entire use process can be set in advance. The interface is fully in Chinese, and the operation is simple and clear. All test items are automatically tested after being set, without the need for manual intervention.

Insulation boot testing device, safety tool testing equipment

Technical Specifications:

1Input voltage:~220V 50Hz

2Output voltage:0-30kV

3Capacity:3kVA

4Test quantity:each time6only

5Measurement data:Can display and print the voltage value of each test sample;Leakage current value

6Overcurrent protection;Overvoltage protection;Customize time, voltage, and leakage current values

7LCD display, fully Chinese menu operation, with printing

8Measurement accuracy:voltage±2%(±3a character)current±2%(±3a character)

9Quality:insulated boots(glove)operation box12KgPower frequency withstand voltage test bench60kg

Notes:

1.During the testing process, the operator should operate the test device at a safe distance(Less than per meter in the air20KV)The power frequency withstand voltage test bench must be reliably grounded, with a grounding resistance of less than0.1Ω.

2.Before use, the insulation resistance should be tested, and its insulation resistance value should be greater than2MΩ.

3.Before use, check whether the contacts of each electrical component are loose, whether the contact is good, and whether each protection system can work normally.

4.Before use, the insulation rod, electrode, electrode rod, water tank and other parts should be wiped with alcohol.

5.After the experiment is completed, the water should be drained and all parts should be wiped dry with a cotton cloth. If not in use for a long time, store the sink, electrode rod, and insulation support rod in a dry and ventilated place.