JDW portable temperature calibration furnace

NegotiableUpdate on 12/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The JDW portable temperature calibration furnace adopts a high stability temperature controller, with a testing temperature range of 35 ℃ -650 ℃. The homogenization block is made of alloy material with good thermal conductivity. At the insertion depth, horizontal temperature field. Widely used in machinery and ships within the required temperature range

Product Details

JDW portable temperature calibration furnaceUsing a high stability temperature controller, the test temperature range is -20 ℃ -1200 ℃, and the heat equalizing block is made of alloy material with good thermal conductivity. Used within the required temperature range, widely used in industries such as machinery, ships, chemicals, food, electricity, pharmaceuticals, etc.

JDW portable temperature calibration furnacetoolIt has the following characteristics:

● Small size, light weight, easy to carry;

Various types of insertion tubes can meet the testing and calibration needs of sensors of different sizes and quantities. And it can be customized according to the special needs of users;

Good horizontal and vertical temperature fields;

5-inch TFT color LCD display screen with a resolution of 800 × 480, full touch operation, intuitive and eye-catching use;

● Chinese English interface;

Equipped with upper level management software, it can easily read calibration data;

Quick cooling, easy to set up, good temperature control stability;

● The heat equalizing block can be replaced;

Equipped with protection functions such as load short circuit, load open circuit, and sensor protection.

Product model and technical specifications:

JD-CMP-W150 Low Temperature Type:

Temperature range	-20℃～150℃
Heat source	semiconductor
Instrument accuracy	Level 0.2
Stability	±0.1℃
Display resolution	0.1℃
Deep trap	160mm
Box size	380×180×320mm
Measuring hole diameter	customizable
Number of measurement holes	customizable
power	600W
power supply	220V50Hz

JD-CMP-W650Medium temperature type:

Temperature range	50~650℃
Heat source	electrothermal
Instrument accuracy	Level 0.2
Stability	±0.1℃
Uniformity	±0.2℃
Deep trap	160mm
Trap size	30mm
Box size	330×165×320mm
Measuring hole diameter	customizable
Number of measurement holes	customizable
Vertical temperature field	Within 40mm from the bottom of the trap, ≤ 1 ℃
power	500W
power supply	220V/50HZ

JD-CMP-W1000High temperature type:

Temperature range	300~1000℃
Heat source	electrothermal
Instrument accuracy	Level 0.2
Stability	±0.1℃
Uniformity	±0.2℃
Deep trap	160mm
Trap size	40mm
Box size	380×180×320mm
Measuring hole diameter	customizable
Number of measurement holes	customizable
Vertical temperature field	Within 10mm from the bottom of the trap, ≤ 1 ℃
power	500W
power supply	220V/50HZ

Temperature range	300~1200℃
Heat source	electrothermal
Instrument accuracy	Level 0.2
Stability	±0.1℃
Uniformity	±0.2℃
Deep trap	160mm
Trap size	40mm
Box size	380×180×320mm
Measuring hole diameter	customizable
Number of measurement holes	customizable
Vertical temperature field	Within 10mm from the bottom of the trap, ≤ 1 ℃
power	500W
power supply	220V/50HZ

Precautions for use:

(1) When used on site, the power plug should be reliably grounded.

(2) When the working mode is switched between "cooling" and "heating", it must be in the "stop" position for 2 to 3 minutes.

(3) The tested thermocouple should be straightened 20cm away from the working end and slowly placed into the measuring hole.