LDQ-98A-G High Voltage Electromagnetic Flow Meter

High pressure electromagnetic flowmeter is a product developed specifically for measuring various liquid high-pressure flow rates in oil fields. Used for measuring the pulsating flow rate of molecules and polymers in polymer mother liquor, characterized by high measurement stability, high accuracy, and long service life

Product Overview: The LDQ-98A-G electromagnetic flowmeter is a product developed specifically for measuring high-pressure flow meters in various liquids in oil fields. This product has the characteristics of stable measurement, high accuracy, and long service life by measuring the pulsating flow of molecules and polymers in polymer mother liquor using dry measurement. This series of products is currently widely used in petrochemical, petroleum, water supply and drainage, water injection, and dosing systems.

characteristic:

1. Measure various liquids and additives in the plug pump.

2. It has a reasonable structure, high safety, beautiful appearance, and is suitable for use in medium and high voltage environments.

3. Start working from measuring liquid at 0.01m/h.

4. Measurable medium with particles. Liquids or slurries, mineral slurries, pharmaceuticals, etc.

5. Good anti-interference performance, with anti-static voltage and lightning strike voltage up to 1500V.

6. Used for measuring and controlling high-pressure conductive fluids in closed pipelines.

7. Special equipment manufacturing certification.

8. Independent intellectual property technology design and manufacturing.

9. Special high-pressure flow measurement tube technology and process.

10. Special high-pressure resistant lining technology and process.

11. High reliability and high-quality.

Technical Specifications:

Nominal diameter: DN10~DN150

Pressure rating: 25MPa~40MPa

Sensor protection level: IP65, IP67, IP68

Electrode materials: Stainless steel 316L, Hastelloy Hc, Hastelloy Hb, Titanium Ti, Tantalum Ta, Platinum Pt

Measurement media: clean water, sewage, polymers, acidic and alkaline water, corrosive agents, pulp, mineral slurry, etc

Dielectric conductivity:>5uS/cm

Accuracy: Level 0.5, Level 1.0

Working power supply: AC220V+10%, DC24V ± 5%, power consumption 15VA

Signal output: frequency 5kHz, 4~20mA, RS485 MODBUS (HART optional) Environmental temperature: -20 ℃~55 ℃, -30 ℃~80 ℃

Environmental humidity: 5%~95%

Lining material: polytetrafluoroethylene (F4) and perfluoroethylene propylene (F46)

Applicable caliber: DN10~DN150 DN10~DN150

Medium temperature: ≤ 100 ℃ ≤ 120 ℃

Converter model: DS05 DS06 DS08

Protection level: IP65 IP65 IP67

Explosion proof grade: ordinary Ex d ib mb Ⅱ C T5 Gb

Installation method: integrated or split type integrated or split type

Electrical interface: M20x1.5 internal thread M20x1.5 internal thread