Labom type bimetallic thermometer

Labom type bimetallic thermometer

Bimetallic thermometer，Equipped with an adjustable connector system, model series FA

Design features

——The material of the fusion part between the shell and the medium is stainless steel

——Dial DN100/160, protection level IP66

——Can provide different forms of connections

——Accuracy level 1 meets EN 13190 standard

——Fine tuning the pointer for correcting the indication

——Indicator damping (standard)

optional

——Dial filling

——Material certification in accordance with DIN EN 10204

——Can be connected to Zone 0 with protective sleeve

Application

These thermometers are suitable for outdoor and corrosive environments. Other liquid damping can also be provided for extreme temperature conditions. The temperature probe is prone to bending, so we recommend installing a suitable protective tube.

Application Fields

——Chemistry and Petrochemicalsindustry

——Mechanical processing

——Main process technology

——Ship

Technical data

housing

Stainless steel No. 1.4301（304），

Dial sizes 100 and 160 mm

Labom type bimetallic thermometer

Shell design

Protection level IP66 in accordance with EN60529

Can be filled with liquid at the same time

Measuring element

The constant temperature bimetallic spiral conforms to DIN 1715 and has good adjustment force, fast action, and laser welding for heat aging, substrate, and connectors

Pointer axis

Stainless steel No. 1.4571（316Ti）Equipped with numerous bearings and flexible joint screws

Temperature measurement kit

Stainless steel No. 1.4571（316Ti）Diameter 8 or 6 mm

Can provide standard length，Refer to the ordering instructions

Front glass

Instrument glass or polymer materials

Shell sealing

DINNA rubber

Measurement system damping

As a standard, the indicator damping can provide additional damping filling for the entire system, with scales ranging from -40 ℃ to 160 ℃

Nominal range

Complies with NE13190 from -40...+500 ℃ (with a limit of 600 ℃) and other values as required. For ranges above 400 ℃, we recommend using protective tubes that comply with DIN 43772

precision

Compliant with EN13190 Level 1. These levels are not caused by errors, but by changing the position of the connection point. However, this possible error can be compensated for by readjusting the adjustable pointer

Storage or transportation temperature

Z-20...+60 ℃, other values as required

Application Guide

The load capacity of the temperature measurement package depends on the following parameters:

1. measured medium
2. Pressure of the measured medium
3. Temperature of the measured medium
4. flow velocity
5. Immersion length
6. material

If required, necessary technical testing can be conducted