Liquid thermal shock test chamber

NegotiableUpdate on 01/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Liquid type thermal shock test chamber: simple control panel, full-color touch screen control, temperature and humidity can be programmed simultaneously. Adopting the original French "Taikang" compressor circulation system, the operation is more stable and reliable.

Product Details

Liquid thermal shock test chamber

Product Introduction:

Technical Specifications
Temperature range of the test tank	-55℃— +100℃
High temperature tank temperature setting range	+60℃— +150℃
Heating time of high temperature tank	RT (room temperature) -+150 ℃ takes about 40 minutes (at room temperature of+10-+30 ℃)
Low temperature tank temperature setting range	－65℃-- －10℃
Cooling time of low-temperature tank	RT (room temperature) -65 ℃ takes about 85 minutes (at room temperature of+10-+30 ℃)
temperature fluctuation	±1.0℃
Temperature Uniformity	±2.0℃
Impact recovery time	-55--+85 ℃ takes about 5 minutes. ※ The high and low temperature impact constant temperature time is more than 30 minutes each. ※
product structure
Inner box dimensions	W×H×D ：500×500×400(mm)
Inner box material	Stainless steel plate (SUS # 304)
outer box material	Stainless steel plate (SUS # 304)Or steel plate baking paint
Insulation material	a. High temperature tank: Aluminum silicate insulation cotton b. Low temperature tank: High density PU foam
door of the box	Single panel doors for upper, middle, and lower boxes, left opening a. Embedded flat handle b. Rear button: SUS # 304 c. Silicone foam strip
Sample placement rack	a. Intermediate testing room b. Load capacity not exceeding 5KG c. Stainless steel SUS # 304 inner box
heating system	Fin type heat dissipation tube shaped stainless steel electric heater 1. High temperature slot 6 KW 2. Low temperature slot 3.5 KW
Air circulation system	1. Two 1HP motors 2. Stainless steel extended shaft 3. Multi blade fan (SIROCCO FAN) 4. Specially designed fan forced air circulation system
Liquid typethermal shock chamberFreezing system
compressor	Emerson Compressor
condenser	Fin type attached platform dispersing hot air fan
evaporator	Fin type multi-stage automatic load capacity adjustment
expansion valve	Danfoss components from Denmark
refrigerant	Imported environmentally friendly refrigerant R404A from the United States
Refrigeration auxiliary components	Desiccant (Denmark), oil separator (USA), refrigerant window (Denmark), solenoid valve (Japan), filter (Japan), pressure controller (Korea), shut-off valve (Italy) and other refrigeration accessories are all imported parts

　　Function:

　　Suitable for industries such as electronic and electrical components, automation parts, communication components, automotive parts, metals, chemical materials, plastics, etc., physical changes of defense industry, aerospace, military industry, BGA, PCB substrate, electronic chip IC, semiconductor ceramic and polymer materials, testing the repeated tensile force of materials at high and low temperatures and the chemical changes or physical damage of products during thermal expansion and contraction can confirm the quality of products. It is used in various fields from precision IC to heavy machinery components and is a testing box for product testing.

　　Features:

1. Simple control panel, full-color touch screen control, temperature and humidity can be programmed simultaneously.

2. Adopting the original French "Taikang" compressor circulation system, the operation is more stable and reliable.

3. Glass observation window, which can be used for observing test samples in experiments, equipped with anti sweat electric heating device to prevent water vapor condensation and droplets, and high brightness fluorescent lamp to maintain illumination inside the box.

4. Stainless steel inner box, easy to operate, low noise.

　　composition

　　Cold and hot shock test chamber refers to a test chamber that can simultaneously apply temperature and humidity stress. Composed of refrigeration system, heating system, control system, temperature and sensor system, etc.

　　The test method met by the cold and hot shock test chamber is:

GB/T2423.1.2、GB/T10592-2008、GJB150.3Cold and hot shock test chamber.

usePrecautions for Cold and Hot Shock Test Chamber:

1. Keep away from heat sources such as stoves and radiators. Meanwhile, direct sunlight should be avoided. This is beneficial for the thermal shock test chamber.

2. It should be placed in a stable location on the ground. Otherwise, the compressor will generate vibration and a large amount of noise during startup, which will shorten the service life of the cold and hot shock test chamber for a long time.

3. It should be placed in a well ventilated area. The back of the test box should be more than 60 centimeters away from the wall, and the top height should be more than 60 centimeters. There should not be too much debris around.

Guangdong Kebao Testing Equipment Co., Ltd. has been focusing on constant temperature and humidity test chambers, constant temperature and humidity machines for many yearsthermal shock chamberEquipment such as high and low temperature impact test chambers, salt spray test chambers, ultraviolet aging test chambers, and sand and dust test chambers. Welcome to call for consultation:

Tag: Hot and Cold Shock Test Chamber