Low speed submersible thruster 3.0-7.5KW

NegotiableUpdate on 07/31

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Brief description: The lifting system base, steel rope fixing frame, and guide base of the 3.0-7.5KW low-speed submersible thruster are all fixed with expansion bolts at the associated interface with the pool, without the need for reserved holes. The installation system of low-speed thruster II uses guide steel rope instead of guide rod, which has the characteristics of convenient transportation and simple on-site installation. The low-speed thruster fundamentally avoids the situation of guide rod bending and deformation caused by transportation, which affects normal use, and effectively improves the phenomenon of inability to lift due to installation errors of guide rods when the pool is too deep.

Product Details

brand	Lino	Customized processing	correct
Blender type	other	Material type	other
Applicable materials	Solder paste, dry powder, concrete, medicine, mud, food, chemicals, feed, pulp, oil, asphalt	Motor Power	3kw
Power Type	other	Layout form	other
mixing method	other

Low speed submersible thruster 3.0-7.5KW

Structural features:

1. Spiral impeller with sweep angle, capable of self-cleaning, without entanglement or blockage;

2. Reliable sealing, no leakage, and equipped with full function protection against leakage and overheating;

3. Low energy consumption and no noise.

The motor winding is insulated to Class F with a protection level of IP68. It uses imported bearings with one-time lubrication and maintenance free function, which have oil chamber leakage detection and motor winding overheating protection functions, making the operation of the motor safer and more reliable. The friction material of the mechanical seal is corrosion-resistant tungsten carbide, and all fasteners are made of stainless steel. 0-7.5KW impeller diameter range: 1000-2500mm impeller speed range: 25-115r/min thrust range: ≤ 3230N

Operation mode:

The installation and positioning of a submersible thruster have a significant impact on its mixing effect. In order to achieve the expected operating effect, we recommend that users follow the requirements of professional designers, fully considering the shape of the pool, the position of the inlet and outlet water, and the vortex caused by the reflection of the water flow from the agitator to the structure. We aim to minimize the occurrence of short circuit circulation and dead corners, and avoid direct impact with the pool wall to reduce the flow rate. Referring to the operating mode diagram below can help you choose a reasonable installation form for the submersible thruster.

Low speed submersible thruster 3.0-7.5KW

Structure:

1. Tail wing: equipped with leakage sensors and motor winding overflow protection alarm devices inside.

2. Cable line: The unique cable sealing design eliminates the hidden danger of cable leakage.

3. Motor: The insulation level of the motor winding is F level, and the protection level is IP68. It uses imported bearings with one-time lubrication and maintenance free, and has oil chamber leakage detection and motor winding overheating protection functions, making the operation of the motor safer and more reliable.

4. Deceleration device

5. Paddles: Paddles are made of elastic polyurethane or aluminum alloy, capable of withstanding changing loads, and the thrust is evenly distributed to the mixture, with excellent hydraulic design.

6. Mechanical seals: Two independent sets of mechanical seals ensure the long-term reliable operation of submersible motors.

7. Bearings: Imported high-quality one-time lubricated bearings with a designed service life of 8000 hours.

8. There are leakage sensors and motor winding over temperature protection alarm devices inside.