Low temperature wire

Single strand low-temperature wire - SL-32, SL-36 Product description Lake Shore non-magnetic (NM) single wire (SL) is a phosphor copper wire (phosphor tin copper alloy). This line ranges from room temperature to liquid helium temperature, and its temperature changes with temperature. SL-32 can be used for sensor installation, which requires stronger and more robust wires.

Single strand low-temperature line - SL-32, SL-36

Product description

Lake Shore non-magnetic (NM) single wire (SL) is a type of phosphor copper wire (phosphor tin copper alloy). This line ranges from room temperature to liquid helium temperature, and its temperature changes with temperature.

SL-32 can be used for sensor installation, which requires stronger and more robust wires.

SL-36 is recommended for regular sensor installation.

feature

• Phosphorus copper wire

• Non ferromagnetic

Adjustable current range 1 µ A -1 mA

• Single share

32 and 36 AWG

• Polyimide insulation (SL-32)

• Polyvinyl formal insulation, transparent (SL-36)

Double stranded twisted low-temperature wire - DT-32, DT-36

Product description

Twisted pair is a pair of 32 or 36AWG single stranded (2-wire) phosphor copper wires, with 3.15 twists per centimeter (8 twists per inch). This wire is a good choice to minimize any possible sensor noise when the induced current passes through the wire to the diode sensor or sample.

feature

• Phosphorus copper wire

• Non ferromagnetic

• Color code (cathode green, anode transparent)

Single stranded wire (2 wires)

32 and 36 AWG

• Polyimide insulation

Minimize sensor noise

4-strand twisted pair low-temperature wire QT-32, QT-36

Product description

4 twisted pair cables are 2 pairs (4 wires) of 32 or 36 AWG phosphor copper wire Each pair contains 3.15 twists per centimeter (8 twists per inch), and 2 pairs are coiled with 1.57 twists per centimeter (4 twists per inch). When the noise received by the diode sensor or sample through the induced current through the wire needs to be minimized, this wire is a good choice. Use a pair of twisted wires for sensor excitation and other pairs for sensor output voltage to minimize electromagnetic noise reception.

feature

• Phosphorus copper wire

• Non ferromagnetic

2 pairs of twisted wires (4 wires), color code

• 最小化噪音

• Polyimide insulation (QT-32)

• Polyvinyl formal insulation (QT-36)

4 strands - low-temperature wire - QL-32, QL-36

Product description

A 4-strand cable is a ribbon cable with 4 wires, making it easier for heat sinks and wrapped wires to work compared to a single wire. Non inductive (double stranded) winding is simple, and it is used to make heat sinks and heaters using four stranded wires. In addition, this line is colored for easy identification and can be divided into 2 pairs of lines. Due to its low magnetoresistance, the standard 4-wire measurement method for 4-wire is also very useful in magnetic field applications.

Note: The 4-strand wire is a ribbon cable woven with a 999 adhesive layer. The separation of lines can be mechanically separated using blades or other sharp flat blade tools.

feature

• Phosphorus copper wire

• Non ferromagnetic

4 colored wires

• 最小化噪音

• Polyimide insulation

32 and 36 AWG

Nickel chromium alloy heater wire - NC-32

Product description

This high resistance wire is a typical item required for heaters. Relatively large-sized wires have sufficient surface area to dissipate heat, and the heat generated inside the wire is only at a moderate temperature.

Note: We lack experience in producing and supporting heaters with a power of 25W or higher using wires smaller than 32AwG. You can choose Lakeshore's cylindrical heater.

feature

80% nickel, 20% chromium

• Non ferromagnetic

• 32 AWG

• Polyimide insulation

Twisted Wire CT-34

Product description

These low resistance twisted wires are ideal for wire extension in Lakeshore low-temperature Hall generators.

feature

Silver plated copper wire 34 AWG

Teflon insulation

Heavy duty Wire-HD-30

Product description

This type of wire is more sturdy and is used for resistance heaters that require or want low resistance in low-temperature environments.

feature

•30 AWG

7 pieces of 38 AWG silver plated twisted copper wire

Black etched Teflon and epoxy adhesive bonding

Manganese copper wire - MW-30, MW-32, MW-36

Product description

Lakeshore's manganese copper wire is commonly used for wiring in non-magnetic environments of low-temperature thermostats or heaters.

feature

83% copper, 13% manganese, and 4% nickel

• Non ferromagnetic

30, 32, and 36 AWG

• Concentrated polyvinyl formal insulation