MS3101-00-01 MS3100 series vibration sensor

MS3101-00-01 MS3100 series vibration sensor

MS3101-00-01 MS3100 series vibration sensor vibration speedSensors are mainly installed on the bearing covers of various rotating mechanical devices, such as turbines, compressors, fans, and pumpsthe sensorIt's... itThe vibration of the rotor supported by rolling bearings will be sufficiently transmitted to the bearing seat, and the speed sensor installed on the bearing seat or very close to the bearing housing,Output voltage by cutting magnetic field lines with a moving coil，Provide signals to monitoring instruments for predicting and alerting mechanical faults.Sensors do not require power supply or installation during operationConvenient and heat-resistantSuch characteristics.

IIMS3101-00-01 MS3100 series vibration sensorTechnical Specifications：

1 Sensitivity: 31.5mV/mm/s±5%(Optional)

2 Frequency response:10 ～ 1000 Hz

3 Natural frequency: 10Hz

4 Measurable amplitude: ≤ 2mm (P-P)

5 Acceleration: 10g

6 Measurement direction: horizontalOr vertical, (or universal installation)

7 Usage environment:-25℃～100℃

relative humidity：≤90%

8 Dimensions: φ 30×65mm

9 Material:304 stainless steel

10 Installation fixing screw holes: M10 * 1.5 * 10mm (depth) customizable

three、MS3101-00-01 MS3100 series vibration sensorInstallation and use: Can replace Bentley

Install vertically or horizontally on the measured vibration point, and place the sensor at the bottomMFix the sensor on the tested housing with 8 or M10 screws, and then tighten it on top.

4、 Attention:

1 SensorSevere collision and knocking should be prevented.

2 During transportation and storage, it should be placed inside the packaging box

• Zhengzhou Hangke Instrument Co., Ltd

• Main business: eddy current sensors, vibration sensors, tachometers, integrated vibration transmitters, integrated eddy current sensors, pressure transmitters, temperature sensors, speed sensors, shaft vibration transmission protection meters, shaft vibration monitoring instruments, shaft displacement monitoring instruments, portable vibration meters, thermal expansion sensors, vibration temperature combination probes, three parameter combination probes, four parameter combination probes