MX-3/MX5 Ultrasonic Thickness Gauge

NegotiableUpdate on 10/02

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The MX3/MX5/MX5DLMX series ultrasonic thickness gauge is a new generation ultrasonic thickness gauge launched by DAKOTAULTRASONICS in the United States

Product Details

Ultrasonic thickness gauge MX3/MX5/MX5DL

The MX series ultrasonic thickness gauge is a new generation ultrasonic thickness gauge launched by the American company DAKOTA ULTRASONICS. It has the characteristics of simple use, complete functions, compact size, and high reliability.

MX-3 Ultrasonic Thickness Gauge
Handheld ultrasonic thickness gauge is a reliable precision measuring tool that can be operated without special training. By placing the probe on top of the tested material, the thickness of the tested material can be read, or by dragging the probe along the surface of the tested material, the MX-3 can automatically find the thinnest point of the tested material.

MX-5 Ultrasonic Thickness Gauge
In addition to all the functions of MX-3, the following new features have been added:

-

-
-

Alarm function: If the measured value is less than the minimum allowable value you input, the red light will light up and there will be a BB alarm sound prompt. The green light will indicate that the measurement is within the allowable range.
Difference method: Display the difference between the measured value and the pre-set value.
RS232 port: Output data to a printer or computer.

MX-5DL Ultrasonic Thickness Gauge
In addition to all the functions of MX-5, it also adds storage function, which can store 1000 measurement data. The instrument also comes with communication cables and software that can transfer data to a computer.

brand newMMX series ultrasonic thickness gaugeOn the basis of the MX series products, the coating penetration function has been successfully added, and when there is paint on the surface of the tested object, the net thickness of the material can be measured without removing the paint.

Technical parameters of ultrasonic thickness gauge MX3/MX5/MX5DL
Measurement range: 0.63-500mm (steel, depending on probe)
Display accuracy: 0.01mm
Probe frequency: 1MHz~10MHz
Display mode: LCD display with backlight
Calibration: Dialogue probe, automatic calibration
Speed range: 1250-10000m/s
Scanning method: Measure 16 points per second to capture the thinnest point
Power supply: 2 No. 15 batteries. Continuous use time reaches 200 hours. When the battery power is insufficient, the display will flash an alarm until it automatically shuts down
Keyboard: 6-key waterproof, oil resistant keyboard
Operating temperature: -30 ℃~50 ℃
Size: 63.5x114.3x31.5mm
Weight: 300g
Packaging: ABS engineering plastic box

Selection of commonly used probes for ultrasonic thickness gauges MX3/MX5/MX5DL

model	frequency	Probe chip diameter	measurement range	Instructions
PT-102-2000	5.0MHz	φ6.3mm	1.0～152mm	Standard probe
PT-101-2000	5.0MHz	φ4.7mm	1.5～50mm	Small diameter probe
PT-104-0000	1.0MHz	φ12.7mm	3.8-50.8mm (in cast iron)	Cast iron probe
PT-102-1000	2.25MHz	φ12.7mm	1.5～127mm	Low frequency probe
PT-102-3200	7.5MHz	φ6.3mm	0.63～152mm	Ultra thin probe
PT-104-2000	5.0MHz	φ12.7mm	1.27～500mm	Ultra thick probe
PT-042-2000	5.0MHz	φ6.3mm	1.0～152mm	Standard high temperature probe, up to 340 ℃
PT-044-2000	5.0MHz	φ12.7mm	1.27～500mm	Thick high-temperature probe, up to 340 ℃

Note: High temperature coupling agents are required when testing high-temperature surfaces.