Medium sized gas pressure reducer

NegotiableUpdate on 12/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Medium sized gas pressure reducer: The body is made of brass. The structure of the two-stage pressure reducing system is basically similar, consisting of components such as the valve top rod, pressure regulating spring, elastic film device, and pressure reducing valve.

Product Details

Medium sized gas pressure reducer

structural characteristics

The mother body and upper cover are made of high-quality brass
2 'pressure gauge
2 'membrane
Equipped with an external safety valve
Inlet pipe with sintered bronze filter screen
The inner lining of the upper cover is made of special plastic material to make pressure regulation smoother and more stable
Obtained UL safety certification in the United States
Three years of free maintenance
Dimensions: 160mm × 140mm × 100mm
Weight: 1.20kg

Medium sized gas pressure reducerworking principle

The body of the gas cylinder pressure reducer is made of brassmake. The structure of the two-stage pressure reducing system is basically similar, consisting of components such as the valve top rod, pressure regulating spring, elastic film device, and pressure reducing valve. The first stage pressure reduction system is mainly used to automatically reduce high-pressure gas to medium pressure gas, reducing the pressure to 2MPa, and then sending it to the second stage pressure reduction system. In the secondary pressure reducing system, when the pressure regulating screw is tightened, the pressure reducing valve is opened and closed to varying degrees through the pressure regulating spring, elastic film device, and valve top rod, in order to adjust the pressure reduction degree of the oxygen supplied by the first pressure reducing system or stop the gas supply.

2. The thread size at the inlet joint of the gas cylinder pressure reducer is 315 875mm， The inner diameter of the joint is 5.5mm, and the inner diameter of the outlet joint is 6mm, with a maximum flow rate of 80m3/h. The pressure reducer body is also equipped with a high-pressure oxygen gauge and a low-pressure oxygen gauge, which respectively indicate the pressure in the high-pressure chamber (i.e. the oxygen cylinder) and the low-pressure chamber (i.e. the working pressure). The range of the high-pressure oxygen meter is. 25MPa. The range of the low-pressure oxygen meter is 0-V 4MPa

When using the QD-1 pressure regulator, when the adjusting screw is turned clockwise, the pressure reducing valve can be pushed open, and high-pressure oxygen flows into the low-pressure chamber through the gap. Due to the expansion of oxygen in the low-pressure chamber, the pressure decreases, which is known as the decompression effect.

3. The thread size of the inlet joint nut of the gas cylinder pressure reducer is G15.875mm, and the inner diameter size of the joint is 7mm. The inner diameter size of the outlet joint can be selected as 5mm or 9mm according to different needs. The range of the high-pressure oxygen meter installed on the body is 0-25MPa, and the range of the low-pressure oxygen meter is 0-4MPa.