Mold Damp Heat Test Chamber

NegotiableUpdate on 12/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The mold damp heat test chamber equipment simulates the growth of mold and the climate of bacterial culture environment manually. By adjusting the temperature and humidity, it accelerates the mold test to assess the anti mold ability of electrical equipment, paint and coatings, as well as bacterial culture, fermentation, breeding and other experiments.

Product Details

molddamp-heattest chamberTest environment: All operational technical data of the product are measured under the conditions of room temperature ≤ 25 ℃, water temperature ≤ 25 ℃, relative humidity ≤ 85% R.H., and no load in the test chamber.

It is a testing equipment required for storing bacterial strains, biological cultivation, and scientific research experiments in colleges and universities, pharmaceutical, military, electronic, chemical, and biological research departments Used to test and evaluate its parameters and performance after changes in humid and hot temperature environments.

This box can simulate mold growth and bacterial culture manuallyBy adjusting the temperature and humidity, accelerating the mold test to assess the anti mold ability of electrical equipment, paint and coatings, as well as conducting experiments on bacterial culture, fermentation, breeding, etc.

Four temperature and humidity ranges, the first temperature range is -10~+60 ℃, humidity range is 30%~95% RH; the second temperature range is -10~+100 ℃ or+150 ℃, humidity range is 20%~98% RH; the third temperature range is -40~+100 or+150C, humidity range is 20%~98% RH; the fourth temperature range is -70~+100 or+150 ℃.

This series of products is widely used for accelerated wet heat testing of products, materials, components, coatings, coatings, equipment, etc. in the aerospace, electronics, instrumentation, information and communication industries, in order to analyze and evaluate the performance and behavior of the test samples in specific environments. This device is a Jun standard mold testing chamber.

meet the standard

1 、GJB150.10A-2009

2、GB10586-2006

3、GB150.3A-2009

4、GJB150.4A-2009

5、GJB150.9-2009

霉菌湿热试验箱

molddamp-heattest chamberTechnical specifications:

studio dimensions(cm)		50×60×75	80×80×80	100×100×100
Overall dimensionscm）		115×85×170	145×105×185	170×125×2050
sex can	temperature range	+10℃～+80℃
	Temperature Uniformity	＜2℃
	temperature deviation	±2℃
	temperature fluctuation	≤1℃（≤±0.5℃,pressGB/T5170-1996Expressing)
	Heating and cooling time	Overall average1℃/min (no-load)
humidity range		20%RH～95%RH
Humidity deviation		±2％（≥75％RH），±5％（≤75％RH）
Growing Environment		temperature25℃～30℃ humidity:95%
fresh air system		Automatic fresh air exchange
Sterilization device		Experiment completed with automatic mold
Temperature Controller		Chinese color touch screen+ PLCController (self-developed control software)
Equipment operation mode		Fixed value operation, program operation
Refrigeration compressor		Imported fully enclosed compressor
Humidification water		Distilled water or deionized water
Security protection measures		Leakage, short circuit, overheating, water shortage, motor overheating, compressor overpressure, overload, overcurrent
power supply		AC380V 50Hz three-phase four wire+ground wire
meet the standard		GBT 2423.16-2008 ；IEC6008-2-10:2005；GB-T5170.18-2005 GJB 150.10A-2009 ；GJB150.10—86 ；GJB4.10-83；